Dear Piotr Wilczek, On 17/05/13 21:55, Piotr Wilczek wrote: > This patchset add support for a new Samsung board Trats2. > The board use now new i2c framework. > Support for new multi function pmic max77693 is added. > > This patchset depends on: > commit: 8faefadb7305b95d02df38bd2ea61429d59483e5 > Author: Marc Dietrich <marvi...@gmx.de> 2013-03-29 08:57:10 > disk: fix unaligned access in efi partitions > > Changes in v3: > - I2C_GET_BUS replaced by i2c_get_bus_num() function > - use i2c_set_bus_num() instead I2C_SET_BUS maro > That macro should be completly replaced when all i2c drivers > are adapted to new i2c framework > - add Maintainer entry > - changed T-flash detect pin to GPX3[3] > - removed MMC_ASYNC > - swiched to new i2c framework, use hardware and soft i2c > - adapted s3c24x0 i2c driver to new i2c framework > > Changes in v2: > - changed printf to debug > - removed lcd callback in panel_info > - changed i2c from hardware to software > - use max77693 multifunction pmic > > Piotr Wilczek (12): > pmic:max77686: add function to set voltage and mode > drivers:power:max77693: add support for new multi function pmic > max77693 > arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 > i2c:multi_i2c: adapt file to new i2c framework > power: fix pmic command > drivers:power:power_i2c: adapt file to new i2c framework > driver:i2c:s3c24x0: adapt driver to new i2c framework > drivers:video:s6e8ax0: change data_to_send array to static > drivers:lcd: fix unaligned access on lcd > samsung: trats2: add support for new board Trats2 > board:VCMA9 switch to ne i2c framework > board:smdk5250: switch to new i2c framework > > MAINTAINERS | 4 + > Makefile | 1 + > arch/arm/include/asm/arch-exynos/gpio.h | 17 +- > board/samsung/common/multi_i2c.c | 37 ++- > board/samsung/smdk5250/smdk5250.c | 2 +- > board/samsung/trats2/Makefile | 50 +++ > board/samsung/trats2/trats2.c | 533 > +++++++++++++++++++++++++++++++ > boards.cfg | 1 + > common/lcd.c | 12 +- > drivers/i2c/Makefile | 2 +- > drivers/i2c/s3c24x0_i2c.c | 100 +++--- > drivers/power/battery/Makefile | 1 + > drivers/power/battery/bat_trats2.c | 81 +++++ > drivers/power/mfd/Makefile | 49 +++ > drivers/power/mfd/fg_max77693.c | 143 +++++++++ > drivers/power/mfd/muic_max77693.c | 91 ++++++ > drivers/power/mfd/pmic_max77693.c | 110 +++++++ > drivers/power/pmic/pmic_max77686.c | 186 +++++++++++ > drivers/power/power_core.c | 8 + > drivers/power/power_i2c.c | 6 + > drivers/video/s6e8ax0.c | 26 +- > include/configs/VCMA9.h | 9 +- > include/configs/exynos5250-dt.h | 8 +- > include/configs/trats2.h | 326 +++++++++++++++++++ > include/power/max77686_pmic.h | 11 + > include/power/max77693_fg.h | 65 ++++ > include/power/max77693_muic.h | 90 ++++++ > include/power/max77693_pmic.h | 56 ++++ > 28 files changed, 1949 insertions(+), 76 deletions(-) > create mode 100644 board/samsung/trats2/Makefile > create mode 100644 board/samsung/trats2/trats2.c > create mode 100644 drivers/power/battery/bat_trats2.c > create mode 100644 drivers/power/mfd/Makefile > create mode 100644 drivers/power/mfd/fg_max77693.c > create mode 100644 drivers/power/mfd/muic_max77693.c > create mode 100644 drivers/power/mfd/pmic_max77693.c > create mode 100644 include/configs/trats2.h > create mode 100644 include/power/max77693_fg.h > create mode 100644 include/power/max77693_muic.h > create mode 100644 include/power/max77693_pmic.h
This patchset doesn't match with subject of patchset. Why this patchset contain many other subjects in it? I think GPIO, I2C, LCD, Power.. are not related with supporting the trats2. Please split them. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot