When the SDHC port number index is invalid we should return an error code
immediately.
Currently we return 'status', which has a value of zero, causing
board_mmc_init() to incorrectly return sucess.
Fix this by returning -EINVAL instead.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
board/freescale/mx6qsabresd/mx6qsabresd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c
b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 2529826..094382b 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -198,7 +198,7 @@ int board_mmc_init(bd_t *bis)
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
--
1.8.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
