I can see it at link: http://lists.denx.de/pipermail/u-boot/2013-May/154984.html while the patch work did not catch it, what could be wrong? Thanks!
Best Regards, Shaohui Xie > -----Original Message----- > From: Xie Shaohui-B21989 > Sent: Thursday, May 23, 2013 4:28 PM > To: u-boot@lists.denx.de; Fleming Andy-AFLEMING > Cc: Xie Shaohui-B21989 > Subject: [PATCH] powerpc/p2041rdb: fix SerDes clock display for RevC & > RevD boards > > For now there are three boards supported: > > Early -PB board used schematic RevC(x) and it's PCBA rev4.0. > Now -PB board used schematic RevD(x) and it's PCBA rev5.0. > Now -PC board used schematic RevD(x) and it's PCBA rev5.0. > > All RevD(x) boards have same clock setting on bank1 and bank2, > RevC(x) board has different clock setting on two banks, PCBA can be used > to distinguish the boards, PCBA could be increased on > RevD(x) board in future, but RevC(x) board will never has PCBA > 4. > > Signed-off-by: Shaohui Xie <shaohui....@freescale.com> > --- > board/freescale/p2041rdb/p2041rdb.c | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > > diff --git a/board/freescale/p2041rdb/p2041rdb.c > b/board/freescale/p2041rdb/p2041rdb.c > index a706a6d..8549639 100644 > --- a/board/freescale/p2041rdb/p2041rdb.c > +++ b/board/freescale/p2041rdb/p2041rdb.c > @@ -84,7 +84,10 @@ int checkboard(void) > }; > unsigned int clock = (sw >> (2 * i)) & 3; > > - printf("Bank%u=%sMhz ", i+1, freq[i][clock]); > + if ((i == 1) && (CPLD_READ(pcba_ver) >= 5)) > + printf("Bank%u=%sMhz ", i+1, freq[i-1][clock]); > + else > + printf("Bank%u=%sMhz ", i+1, freq[i][clock]); > } > puts("\n"); > > @@ -227,6 +230,16 @@ int misc_init_r(void) > "'00' is unsupported\n"); > else > actual[i] = freq[i][clock]; > + > + /* > + * RevD(x) board has a different clock setting with RevC(x) > + * board, CPLD on RevD(x) board has pcba_ver >= 5. RevC(x) > + * board has pcba_ver = 4, it can be used to distinguish > + * the two boards. > + */ > + if ((i == 1) && (CPLD_READ(pcba_ver) >= 5)) > + /* RevD(x) board bank2 frequency */ > + actual[i] = freq[i-1][clock]; > } > > for (i = 0; i < NUM_SRDS_BANKS; i++) { > -- > 1.8.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot