Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time
for mmc rescan command.
In current code FIFO_DEPTH is getting calculated after reading the default 
FIFOTH
register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 
-1).
Instead of storing the correct value, we were recalculating the FIFO_DEPT each
time which is not correct.

Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write 
issues"
http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247

Signed-off-by: Hatim Ali <hatim...@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
---
Changes in V2:
        - remove fifoth_val local variable
        - Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve
        EMMC read write issues".
 drivers/mmc/dw_mmc.c |   14 ++++++--------
 1 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 1307b12..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
        struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-       u32 fifo_size, fifoth_val;
+       u32 fifo_size;
 
        dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc)
        dwmci_writel(host, DWMCI_IDINTEN, 0);
        dwmci_writel(host, DWMCI_BMOD, 1);
 
-       fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
-       fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
-       if (host->fifoth_val) {
-               fifoth_val = host->fifoth_val;
-       } else {
-               fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+       if (!host->fifoth_val) {
+               fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+               fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+               host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
                        TX_WMARK(fifo_size / 2);
        }
-       dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+       dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
 
        dwmci_writel(host, DWMCI_CLKENA, 0);
        dwmci_writel(host, DWMCI_CLKSRC, 0);
-- 
1.7.4.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to