Hi Monica, On Mon, May 27, 2013 at 10:01 AM, Monica <[email protected]> wrote: > We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are > using is Spansion S29GL512S. > > As per the flash datasheet we tried programming 4 bytes( using telnet mmb > command) write buffer programming cycle. We succeeded. > > But when we tried programming a binary file ( u-boot.bin) ,it was failing. > Even though the log shows Flash programming passed but in the location when > we do a mdh there is no u-boot data. > > Please find the log captured below. > > IMX6#0>
Your email subject mentions 85xx, but the prompt above says mx6. Which CPU does your board have? _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
