Signed-off-by: Tom Rix <tom....@windriver.com>
---
board/omap3/beagle/beagle.c | 20 ++++++++++----------
board/omap3/evm/evm.c | 16 ++++++++--------
board/omap3/overo/overo.c | 12 ++++++------
board/omap3/pandora/pandora.c | 12 ++++++------
board/omap3/zoom1/zoom1.c | 12 ++++++------
5 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
index 8d60651..cc8e2f9 100644
--- a/board/omap3/beagle/beagle.c
+++ b/board/omap3/beagle/beagle.c
@@ -38,10 +38,10 @@
static int beagle_revision_c;
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -55,23 +55,23 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: beagle_get_revision
* Description: Return revision of the BeagleBoard this code is running on.
* If it is a revision Ax/Bx board, this function returns 0,
* on a revision C board you will get a 1.
- *****************************************************************************/
+ */
int beagle_get_revision(void)
{
return beagle_revision_c;
}
-/******************************************************************************
+/*
* Routine: beagle_identify
* Description: Detect if we are running on a Beagle revision Ax/Bx or
* Cx. This can be done by GPIO_171. If this is low, we are
* running on a revision C board.
- *****************************************************************************/
+ */
void beagle_identify(void)
{
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
@@ -92,10 +92,10 @@ void beagle_identify(void)
}
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
@@ -121,12 +121,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_BEAGLE();
diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c
index 3a27c8f..c008c2e 100644
--- a/board/omap3/evm/evm.c
+++ b/board/omap3/evm/evm.c
@@ -36,10 +36,10 @@
#include <asm/mach-types.h>
#include "evm.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Init ethernet (done here so udelay works)
- *****************************************************************************/
+ */
int misc_init_r(void)
{
@@ -73,22 +73,22 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_EVM();
}
-/******************************************************************************
+/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
* Ethernet hardware.
- *****************************************************************************/
+ */
static void setup_net_chip(void)
{
gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE;
diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c
index 37bf350..809b77b 100644
--- a/board/omap3/overo/overo.c
+++ b/board/omap3/overo/overo.c
@@ -35,10 +35,10 @@
#include <asm/mach-types.h>
#include "overo.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -52,10 +52,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_OVERO();
diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
index dfd51ec..c2f98ea 100644
--- a/board/omap3/pandora/pandora.c
+++ b/board/omap3/pandora/pandora.c
@@ -36,10 +36,10 @@
#include <asm/mach-types.h>
#include "pandora.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE;
@@ -82,12 +82,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_PANDORA();
diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c
index 702f732..db4d087 100644
--- a/board/omap3/zoom1/zoom1.c
+++ b/board/omap3/zoom1/zoom1.c
@@ -37,10 +37,10 @@
#include <asm/mach-types.h>
#include "zoom1.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -54,10 +54,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure zoom board specific configurations
- *****************************************************************************/
+ */
int misc_init_r(void)
{
power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
/* platform specific muxes */
--
1.6.0.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
