Hi,
Can you separate the PMIC and SPI changes into two different patches.
Also may i know why you remove the SPI from configs, does it defined
some where or you don't want SPI at all.?
--
Thanks,
Jagan.
On 07-06-2013 17:25, Inderpal Singh wrote:
They have been defined once already. Hence remove the redundant definitions.
Signed-off-by: Inderpal Singh <inderpal.si...@linaro.org>
---
v1 was posted as the first patch of [1]
Changes in v2:
- split from the patchset at [1]
- removed redundant configs for PMIC
- rebased to latest u-boot-samsung master branch
[1] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/157101
include/configs/exynos5250-dt.h | 26 --------------------------
1 file changed, 26 deletions(-)
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 62b83d4..03b07b2 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -246,11 +246,6 @@
#define CONFIG_SYS_I2C_SLAVE 0x0
#define CONFIG_I2C_EDID
-/* PMIC */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
-
/* SPI */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SPI_FLASH
@@ -278,27 +273,6 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX77686
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS 5
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS 1
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#endif
-
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
