On Wednesday 12 June 2013 06:19 PM, Tom Rini wrote: > On Wed, Jun 12, 2013 at 02:39:13PM +0200, Heiko Schocher wrote: >> Hello Tom, >> >> Am 12.06.2013 14:28, schrieb Tom Rini: >>> On Wed, Jun 12, 2013 at 10:56:01AM +0200, Heiko Schocher wrote: >>>> Hello tom, >>>> >>>> your >>>> >>>> commit 4596dcc1d4ea5763e0f92cf5becd9fc7d4c6e674 >>>> Author: Tom Rini <tr...@ti.com> >>>> Date: Fri May 31 12:31:59 2013 -0400 >>>> >>>> am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c >>>> >>>> introduced, that all am335x based boards must call >>>> save_omap_boot_params() from the board specific s_init function. I >>>> just stumbled over it, as I updated to current head and my upcoming >>>> am335x based siemens boards didn't boot anymore ... should we think >>>> about to move this s_init() to a common place, and extract board >>>> specific things? Maybe arch/arm/cpu/armv7/omap-common/boot-common.c >>>> is a place for it? >>> I think the first non-am335x_evm board pulled the code we need in board/ >>> a bit too far in the board-specific direction. >>> >>> Whacking the WDT (which could be done differently I imagine based on >>> your other patches), calling save_omap_boot_params and UART stuff is >>> common. Figuring out which DDR and how is not. I think we can learn >>> from omap-common/hwinit-common.c::s_init but need to have our own in >>> arch/arm/cpu/armv7/am33xx/board.c and declared __weak or wrapped with >>> CONFIG_AM33XX since TI814x (and TI816x) are different. Or maybe some >>> more thinking share still. >>> >>> Do you have time for this? Thanks! >> I try to find some ;-) >> >> Maybe something like this: >> >> add in arch/arm/cpu/armv7/am33xx/board.c a weak s_init(), which all >> am35xx boards use, and call in this s_init() a s_init_board() which >> all am335x boards must have defined? > s/s_init_board/sdram_init/ and yes. If we whack the UART stuff out into > uart_enable (ala ti814x) and add a board_enable_early_pinmux (for the > muxes needed, and put this right after save_omap_...) we might not need > to make s_init __weak. Just curious here, why the save_omap_boot_params is breaking things in first place for your SOC. Was it not used before ??
Also regarding DDR, is it emif and DDR3 in all those boards ? Regards, Sricharan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot