Commit dfe64e2c89731a3f9950d7acd8681b68df2bae03:

    mtd: resync with Linux-3.7.1

broke the docg4 driver.  Specifically:
 - some of the prototypes of the ecc methods changed
 - the NAND_NO_AUTOINCR flag was removed
 - the ecc.strength element was added.

This patch fixes these.  Tested on the docg4 on my palmtre680 board.

Signed-off-by: Mike Dunn <miked...@newsguy.com>
---
 drivers/mtd/nand/docg4.c |   26 ++++++++++++++------------
 1 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 7dd9953..09f01c8 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -487,7 +487,7 @@ static void docg4_read_buf(struct mtd_info *mtd, uint8_t 
*buf, int len)
 }
 
 static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
-                         int page, int sndcmd)
+                         int page)
 {
        struct docg4_priv *doc = nand->priv;
        void __iomem *docptr = CONFIG_SYS_NAND_BASE;
@@ -577,7 +577,7 @@ static void docg4_write_buf16(struct mtd_info *mtd, const 
uint8_t *buf, int len)
                writew(p[i], nand->IO_ADDR_W);
 }
 
-static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
+static int write_page(struct mtd_info *mtd, struct nand_chip *nand,
                       const uint8_t *buf, int use_ecc)
 {
        void __iomem *docptr = CONFIG_SYS_NAND_BASE;
@@ -626,16 +626,18 @@ static void write_page(struct mtd_info *mtd, struct 
nand_chip *nand,
        write_nop(docptr);
        writew(0, docptr + DOC_DATAEND);
        write_nop(docptr);
+
+       return 0;
 }
 
-static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
-                                const uint8_t *buf)
+static int docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+                                const uint8_t *buf, int oob_required)
 {
        return write_page(mtd, nand, buf, 0);
 }
 
-static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
-                            const uint8_t *buf)
+static int docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+                            const uint8_t *buf, int oob_required)
 {
        return write_page(mtd, nand, buf, 1);
 }
@@ -706,13 +708,13 @@ static int read_page(struct mtd_info *mtd, struct 
nand_chip *nand,
 
 
 static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
-                              uint8_t *buf, int page)
+                              uint8_t *buf, int oob_required, int page)
 {
        return read_page(mtd, nand, buf, page, 0);
 }
 
 static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
-                          uint8_t *buf, int page)
+                          uint8_t *buf, int oob_required, int page)
 {
        return read_page(mtd, nand, buf, page, 1);
 }
@@ -779,7 +781,7 @@ static int read_factory_bbt(struct mtd_info *mtd)
                return -ENOMEM;
 
        read_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
-       status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+       status = docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
        if (status)
                goto exit;
 
@@ -858,7 +860,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t 
ofs)
 
        /* write first page of block */
        write_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr);
-       docg4_write_page(mtd, nand, buf);
+       docg4_write_page(mtd, nand, buf, 1);
        ret = pageprog(mtd);
        if (!ret)
                mtd->ecc_stats.badblocks++;
@@ -959,8 +961,8 @@ int docg4_nand_init(struct mtd_info *mtd, struct nand_chip 
*nand, int devnum)
        nand->ecc.size = DOCG4_PAGE_SIZE;
        nand->ecc.prepad = 8;
        nand->ecc.bytes = 8;
-       nand->options =
-               NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+       nand->ecc.strength = DOCG4_T;
+       nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
        nand->controller = &nand->hwcontrol;
 
        /* methods */
-- 
1.7.8.6

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to