Hi Joe, On 20/06/2013 13:26, SARTRE Leo wrote: > micrel.c: Add function ksz9031_phy_extended_write, helper to MDD > register write > micrel.h: Prototype and define MDD registers > > Signed-off-by: Leo Sartre <lsar...@adeneo-embedded.com> > --- > drivers/net/phy/micrel.c | 29 +++++++++++++++++++++++++++-- > include/micrel.h | 7 +++++++ > 2 files changed, 34 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c > index 2a8b6cb..5b5c11b 100644 > --- a/drivers/net/phy/micrel.c > +++ b/drivers/net/phy/micrel.c > @@ -85,7 +85,7 @@ static int ksz90xx_startup(struct phy_device *phydev) > } > #ifdef CONFIG_PHY_MICREL_KSZ9021 > > -/* > +/** > * KSZ9021 > */ > > @@ -148,9 +148,34 @@ static struct phy_driver ksz9021_driver = { > }; > #endif > > -/* > +/** > * KSZ9031 > */ > + > +/* PHY Registers */ > +#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d > +#define MII_KSZ9031_MMD_REG_DATA 0x0e > + > +/* Accessors to extended registers*/ > +int ksz9031_phy_extended_write(struct phy_device *phydev, > + int devaddr, > + int regnum, > + u16 val) > +{ > + /*select register addr for mmd*/ > + phy_write(phydev, MDIO_DEVAD_NONE, > + MII_KSZ9031_MMD_ACCES_CTRL, devaddr); > + /*select register for mmd*/ > + phy_write(phydev, MDIO_DEVAD_NONE, > + MII_KSZ9031_MMD_REG_DATA, regnum); > + /*setup mode*/ > + phy_write(phydev, MDIO_DEVAD_NONE, > + MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | 0xC000)); > + /*write the value*/ > + return phy_write(phydev, MDIO_DEVAD_NONE, > + MII_KSZ9031_MMD_REG_DATA, val); > +} > + > static struct phy_driver ksz9031_driver = { > .name = "Micrel ksz9031", > .uid = 0x221620, > diff --git a/include/micrel.h b/include/micrel.h > index 25e8a46..d63ff45 100644 > --- a/include/micrel.h > +++ b/include/micrel.h > @@ -9,8 +9,15 @@ > #define MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW 0x106 > #define MII_KSZ9021_EXT_ANALOG_TEST 0x107 > > +#define MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW 0x4 > +#define MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW 0x5 > +#define MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW 0x6 > +#define MII_KSZ9031_EXT_RGMII_CLOCK_SKEW 0x8 > + > struct phy_device; > int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 > val); > int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum); > > +int ksz9031_phy_extended_write(struct phy_device *phydev, int devaddr, > + int regnum, u16 val); > #endif >
This patchset belongs to two are, mainly i.MX (for Congatec) and to Network (this patch). Can you ACK/NACK this ? I will enqueue the other two patches in the meantime. To proceed, I propose I can merge then whole patchset into u-boot-imx to avoid to have inconsistent trees. Thanks, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot