[U-Boot] [PATCH 2/2] LaCie/common: Fix cloudbox ethernet leds

[Frederic Leroy]

From: Frédéric Leroy <fr...@starox.org>

The cloudbox device have a different ethernet phy setup than other ns2
devices. We get initialization value from the GPL LaCie source

Signed-off-by: Frédéric Leroy <fr...@starox.org>
---
 board/LaCie/common/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c
index a62bf9f..d828685 100644
--- a/board/LaCie/common/common.c
+++ b/board/LaCie/common/common.c
@@ -52,10 +52,18 @@ void mv_phy_88e1318_init(const char *name, u16 phyaddr)
        /*
         * Set control mode 4 for LED[0].
         */
+       #ifndef CONFIG_CLOUDBOX
        miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
        miiphy_read(name, phyaddr, 16, &reg);
        reg |= 0xf;
        miiphy_write(name, phyaddr, 16, reg);
+       #else
+       miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
+       miiphy_read(name, phyaddr, 17, &reg);
+       reg &= ~0x3f;
+       reg |= 0x15;
+       miiphy_write(name, phyaddr, 17, reg);
+       #endif
 
        /*
         * Enable RGMII delay on Tx and Rx for CPU port
-- 
1.8.1.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot