Newer gcc versions warn about unused variables.  This patch corrects a few of
those warnings that popped up in a build for the palmtreo680 board.

Signed-off-by: Mike Dunn <miked...@newsguy.com>
---

 drivers/mtd/nand/docg4_spl.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/docg4_spl.c b/drivers/mtd/nand/docg4_spl.c
index 95e856c..734cbeb 100644
--- a/drivers/mtd/nand/docg4_spl.c
+++ b/drivers/mtd/nand/docg4_spl.c
@@ -113,7 +113,6 @@ static int docg4_load_block_reliable(uint32_t flash_offset, 
void *dest_addr)
        int g4_index = 0;
        uint16_t flash_status;
        uint16_t *buf;
-       uint16_t discard, magic_high, magic_low;
 
        /* flash_offset must be aligned to the start of a block */
        if (flash_offset & 0x3ffff)
@@ -154,9 +153,9 @@ static int docg4_load_block_reliable(uint32_t flash_offset, 
void *dest_addr)
         * The IPL on the palmtreo680 requires that this contain a 32 bit magic
         * number, or the load aborts.  We'll ignore it.
         */
-       discard = readw(docptr + 0x103c); /* hw quirk; 1st read discarded */
-       magic_low = readw(docptr + 0x103c);
-       magic_high = readw(docptr + DOCG4_MYSTERY_REG);
+       readw(docptr + 0x103c); /* hw quirk; 1st read discarded */
+       readw(docptr + 0x103c); /* lower 16 bits of magic number */
+       readw(docptr + DOCG4_MYSTERY_REG); /* upper 16 bits of magic number */
        writew(0, docptr + DOC_DATAEND);
        write_nop(docptr);
        write_nop(docptr);
@@ -183,15 +182,15 @@ static int docg4_load_block_reliable(uint32_t 
flash_offset, void *dest_addr)
                write_nop(docptr);
 
                /* read the 512 bytes of page data, 2 bytes at a time */
-               discard = readw(docptr + 0x103c);
+               readw(docptr + 0x103c); /* hw quirk */
                for (i = 0; i < 256; i++)
                        *buf++ = readw(docptr + 0x103c);
 
                /* read oob, but discard it */
                for (i = 0; i < 7; i++)
-                       discard = readw(docptr + 0x103c);
-               discard = readw(docptr + DOCG4_OOB_6_7);
-               discard = readw(docptr + DOCG4_OOB_6_7);
+                       readw(docptr + 0x103c);
+               readw(docptr + DOCG4_OOB_6_7);
+               readw(docptr + DOCG4_OOB_6_7);
 
                writew(0, docptr + DOC_DATAEND);
                write_nop(docptr);
-- 
1.8.1.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to