Hi Magnus, Thanks for the response:) > Until yesterday you were correct. I spent some time updating the > published patches to the current u-boot and the status now is that I > was able to compile the stuff. Haven't tried it on a PDK board yet but > I'm hoping to do that in a couple of days. > I will post patches when the stuff is running, the patches will most > likely not be ready to be merged as there are previous comments to > take care of. Ii had actually embarked myself on modifying the lowlevelinit.S and start.S to create a SPL for uboot although i wasn't sure of finishing it that soo;(. I hope these files apart from the linker script(u-boot.lds) and the config files(config.mk and Makefile) are the ones that need to change for getting NAND boot to work. Please correct me if i don't understand it correctly.
I wasn't actually sure why there is a need to create a separate linker script like u-boot_nand.lds. So i hope the patch would be ready in a couple of days. If you want me to try them on the PDK before you actually release it, that would be great. Another thing i noticed while poking around the code is that though MX35 PDK had SDHC(sd card) drivers in it, the MX31 did not. Would it be in a individual GIT , e.g the U-boot mmc git. Thanks, Alfred. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot