From: Mingkai Hu <mingkai...@freescale.com>
The Freescale C29x family is a high performance crypto co-processor.
It combines a single e500v2 core with necessary SEC engine. There're
three SoC types(C291, C292, C293) with the following features:
- 512K L2 Cache/SRAM and 512 KB platform SRAM
- DDR3/DDR3L 32bit DDR controller
- One PCI express (x1, x2, x4) Gen 2.0 Controller
- Trust Architecture 2.0
- SEC6.0 engine
Signed-off-by: Mingkai Hu <mingkai...@freescale.com>
Signed-off-by: Po Liu <po....@freescale.com>
---
Changes for v2:
- Remove define CONFIG_C291/CONFIG_C292/CONFIG_C293,
replace with CONFIG_C29X
Changes for v3:
- Replace CONFIG_C29X with CONFIG_PPC_C29X
Changes for v4:
- None
Changes for v5:
- None
arch/powerpc/cpu/mpc85xx/Makefile | 2 +
arch/powerpc/cpu/mpc85xx/c29x_serdes.c | 65 +++++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/cpu.c | 3 ++
arch/powerpc/include/asm/config_mpc85xx.h | 12 ++++++
arch/powerpc/include/asm/fsl_law.h | 1 +
arch/powerpc/include/asm/immap_85xx.h | 23 +++++++++++
arch/powerpc/include/asm/processor.h | 3 ++
7 files changed, 109 insertions(+)
create mode 100644 arch/powerpc/cpu/mpc85xx/c29x_serdes.c
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile
b/arch/powerpc/cpu/mpc85xx/Makefile
index 4669883..3cb2a78 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -62,6 +62,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o
COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
# supports ddr1/2/3
+COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o
COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
@@ -116,6 +117,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) +=
fsl_corenet_serdes.o
COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
+COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o
COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
new file mode 100644
index 0000000..4b3214d
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES 4
+
+static u32 serdes1_prtcl_map;
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS1_MAX_LANES];
+};
+
+static const struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {3, {PCIE1, PCIE1, NONE, NONE} },
+ {4, {PCIE1, PCIE1, NONE, NONE} },
+ {5, {PCIE1, NONE, NONE, NONE} },
+ {6, {PCIE1, NONE, NONE, NONE} },
+ {}
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ return (1 << device) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ const struct serdes_config *ptr;
+ int lane;
+
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+ if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+
+ ptr = &serdes1_cfg_tbl[srds_cfg];
+ if (!ptr->protocol)
+ return;
+
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = ptr->lanes[lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index bc26855..2eed872 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -95,6 +95,9 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
CPU_TYPE_ENTRY(BSC9132, 9132, 2),
CPU_TYPE_ENTRY(BSC9232, 9232, 2),
+ CPU_TYPE_ENTRY(C291, C291, 1),
+ CPU_TYPE_ENTRY(C292, C292, 1),
+ CPU_TYPE_ENTRY(C293, C293, 1),
#elif defined(CONFIG_MPC86xx)
CPU_TYPE_ENTRY(8610, 8610, 1),
CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h
b/arch/powerpc/include/asm/config_mpc85xx.h
index 1d46b14..3f48802 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -626,6 +626,18 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#elif defined(CONFIG_PPC_C29X)
+#define CONFIG_MAX_CPUS 1
+#define CONFIG_FSL_SDHC_V2_3
+#define CONFIG_SYS_FSL_NUM_LAWS 12
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
+#define CONFIG_TSECV2_1
+#define CONFIG_SYS_FSL_SEC_COMPAT 6
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+
#else
#error Processor type not defined for this platform
#endif
diff --git a/arch/powerpc/include/asm/fsl_law.h
b/arch/powerpc/include/asm/fsl_law.h
index bea1636..9eb3e13 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -92,6 +92,7 @@ enum law_trgt_if {
LAW_TRGT_IF_LBC = 0x04,
LAW_TRGT_IF_CCSR = 0x08,
LAW_TRGT_IF_DSP_CCSR = 0x09,
+ LAW_TRGT_IF_PLATFORM_SRAM = 0x0a,
LAW_TRGT_IF_DDR_INTRLV = 0x0b,
LAW_TRGT_IF_RIO = 0x0c,
LAW_TRGT_IF_RIO_2 = 0x0d,
diff --git a/arch/powerpc/include/asm/immap_85xx.h
b/arch/powerpc/include/asm/immap_85xx.h
index db70d04..af3853a 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2147,6 +2147,11 @@ typedef struct ccsr_gur {
#ifdef CONFIG_MPC8536
#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#elif defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \
+ & MPC85xx_PORDEVSR2_DDR_SPD_0) \
+ >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT))
#else
#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
@@ -2194,6 +2199,9 @@ typedef struct ccsr_gur {
#elif defined(CONFIG_BSC9132)
#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17
+#elif defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
#else
#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
@@ -2209,6 +2217,10 @@ typedef struct ccsr_gur {
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
u32 pordbgmsr; /* POR debug mode status */
u32 pordevsr2; /* POR I/O device status 2 */
+#if defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008
+#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3
+#endif
/* The 8544 RM says this is bit 26, but it's really bit 24 */
#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
u8 res1[8];
@@ -2355,6 +2367,11 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000
#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000
#endif
+#if defined(CONFIG_PPC_C29X)
+#define MPC85xx_PMUXCR_SPI_MASK 0x00000300
+#define MPC85xx_PMUXCR_SPI 0x00000000
+#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
+#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
#if defined(CONFIG_P1010) || defined(CONFIG_P1014)
#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000
@@ -3024,12 +3041,18 @@ struct ccsr_pman {
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000
#ifdef CONFIG_TSECV2
#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#elif defined(CONFIG_TSECV2_1)
+#define CONFIG_SYS_TSEC1_OFFSET 0x10000
#else
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#endif
#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
+#if defined(CONFIG_PPC_C29X)
+#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000
+#else
#define CONFIG_SYS_FSL_SEC_OFFSET 0x30000
+#endif
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
#define CONFIG_SYS_SNVS_OFFSET 0xE6000
diff --git a/arch/powerpc/include/asm/processor.h
b/arch/powerpc/include/asm/processor.h
index 56b22d8..64a6f9c 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1119,6 +1119,9 @@
#define SVR_T4240 0x824000
#define SVR_T4120 0x824001
#define SVR_T4160 0x824100
+#define SVR_C291 0x850000
+#define SVR_C292 0x850020
+#define SVR_C293 0x850030
#define SVR_B4860 0X868000
#define SVR_G4860 0x868001
#define SVR_G4060 0x868003
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
