Give the user the ability to disable NAND support by defining CONFIG_NO_NAND. This will allow custom hardware to easily support this configuration.
Signed-off-by: Justin Waters <justin.wat...@timesys.com> --- include/configs/am335x_evm.h | 55 ++++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 18 deletions(-) diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index c5a6d4b..7bcfe2e 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -42,12 +42,39 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 +#ifdef CONFIG_NO_NAND +#undef CONFIG_NAND +#else +#define CONFIG_NAND +#endif + /* commands to include */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV #define CONFIG_VERSION_VARIABLE +#ifdef CONFIG_NAND +#define NANDARGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandsrcaddr=0x280000\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \ + "bootm ${loadaddr}\0" \ + "nandimgsize=0x500000\0" +#else +#define NANDARGS "" +#endif + /* set to negative value for no autoboot */ #define CONFIG_BOOTDELAY 1 #define CONFIG_ENV_VARS_UBOOT_CONFIG @@ -63,19 +90,12 @@ "fdtfile=undefined\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ "dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ - "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ "bootpart=0:2\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandsrcaddr=0x280000\0" \ - "nandimgsize=0x500000\0" \ "rootpath=/export/rootfs\0" \ "nfsopts=nolock\0" \ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ @@ -86,10 +106,6 @@ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ "spiroot=/dev/mtdblock4 rw\0" \ "spirootfstype=jffs2\0" \ "spisrcaddr=0xe0000\0" \ @@ -118,10 +134,6 @@ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \ - "bootm ${loadaddr}\0" \ "spiboot=echo Booting from spi ...; " \ "run spiargs; " \ "sf probe ${spibusno}:0; " \ @@ -147,7 +159,8 @@ "if test $board_name = A335X_SK; then " \ "setenv fdtfile am335x-evmsk.dtb; fi; " \ "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" + "echo WARNING: Could not determine device tree to use; fi; \0" \ + NANDARGS #endif #define CONFIG_BOOTCOMMAND \ @@ -231,7 +244,6 @@ /* USB Device Firmware Update support */ #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC -#define CONFIG_DFU_NAND #define CONFIG_CMD_DFU #define DFU_ALT_INFO_MMC \ "boot part 0 1;" \ @@ -241,6 +253,8 @@ "u-boot.img.raw mmc 300 3C0;" \ "u-boot.img fat 0 1;" \ "uEnv.txt fat 0 1" +#ifdef CONFIG_NAND +#define CONFIG_DFU_NAND #define DFU_ALT_INFO_NAND \ "SPL part 0 1;" \ "SPL.backup1 part 0 2;" \ @@ -249,6 +263,7 @@ "u-boot part 0 5;" \ "kernel part 0 7;" \ "rootfs part 0 8" +#endif /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ @@ -337,9 +352,11 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ /* nand */ +#ifdef CONFIG_NAND #define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 #define CONFIG_CMD_SPL_WRITE_SIZE 0x1000 +#endif /* spl export command */ #define CONFIG_CMD_SPL @@ -369,6 +386,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT + +#ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE @@ -395,6 +414,7 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#endif /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM @@ -490,7 +510,6 @@ #define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_SMSC -#define CONFIG_NAND /* NAND support */ #ifdef CONFIG_NAND #define CONFIG_CMD_NAND -- 1.7.9.6 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot