With the latest transition to device tree, there is a need to simplify the load of device tree depending on board type etc. While at it, simplify few other changes as well.
Testing: with a uEnv.txt as: bootdir=/ bootpart=0:1 The following were the boot results: Beagle (rev C1D): http://pastebin.com/fMdsKkgr Beagle XM (rev C1): http://pastebin.com/p1zp9AhG Changes in V2 since v1: - removed xMB version support based on review comments. http://marc.info/?t=137357970500004&r=1&w=2&n=5 V1: http://marc.info/?l=u-boot&m=137357963227510&w=2 Nishanth Menon (6): omap3_beagle: remove JFFS2 support. omap3_beagle: replace uImage.beagle with generic uImage beagleboard: remove RevB support for BeagleBoard Xm omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk omap3_beagle: support findfdt and loadfdt for devicetree support omap3_beagle: support booting from zImage and device tree as last option board/ti/beagle/beagle.c | 28 ++++++------------------ board/ti/beagle/beagle.h | 3 +-- include/configs/omap3_beagle.h | 46 ++++++++++++++++++++++++++++------------ 3 files changed, 41 insertions(+), 36 deletions(-) Regards, Nishanth Menon -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot