Basically, should the coreboot-x86_config replace the use of coreboot ? Or, is coreboot still necessary?
> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot- > boun...@lists.denx.de] On Behalf Of Rossier Daniel > Sent: mercredi 17 juillet 2013 10:29 > To: u-boot@lists.denx.de > Subject: [U-Boot] U-boot & x86 & coreboot > > Hi, > > I would like to run U-boot on x86 emulated QEMU-based environment. I > found some info regarding coreboot + U-boot integration, using U-boot as > payload, etc. but I was unable to start U-boot. > I'm using the 32-bits i686-pc-linux-gnu toolchain and I successfully cross- > compiled coreboot and started it on qemu-system-i386. > I also configured coreboot to use u-boot (ELF) as payload, but coreboot > performs a reset when U-boot should show up after loading. > Where could I have some information regarding that? > Furthermore, I'm unable to debug anything remotely with gdb; gdb cannot > disassemble once connected via "target remote localhost:1234". > > Any hints welcome. > Thanks so much. > > Cheers > Daniel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
