On 07/16/2013 07:28 PM, Liu Hui-R64343 wrote:
-----Original Message-----
From: Troy Kisky [mailto:troy.ki...@boundarydevices.com]
>> <snip>
The working code uses a value of 00b for this field. When I changed it
to 11b, things broke. In the documentation, this register is defined
differently for mx6q vs mv6solo/duallite. The duallite way works for the
quad, and either way works for the duallite.
board/boundary/nitrogen6x/ddr-setup.cfg:DATA 4, MX6_IOM_DRAM_RESET,
0x000e0030
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg:DATA 4 0x020e057c
0x00020030
Who's right? And should it depend on quad vs duallite ?
Currently, I believe that the duallite documentation is correct for all.
Both are not correct. The MMDC owner has known about this doc issue and will
Update them later. The correct is: 00 is the only valid data, others will be
Reserved.
Thank you very much for the concise and definitive reply.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
