Hi Tom, Am 19/07/2013 23:50, schrieb Tom Rini: > On Fri, Jul 19, 2013 at 02:34:55PM -0700, Troy Kisky wrote:
>> On 7/19/2013 2:00 PM, Fabio Estevam wrote: >>> Hi Troy, >>> >>> On Wed, Jul 17, 2013 at 4:46 PM, Troy Kisky >>> <troy.ki...@boundarydevices.com> wrote: >>>> The old value of 0x000e0030 will cause ethernet >>>> timeout issues on the sabrelite and possibly other >>>> boards using the KSZ9021. >>>> I have no explanation as to why. >>>> >>>> But this is a correct change, the TRM will be updated >>>> to show that 00b is the only valid setting for bits >>>> 19-18 of DRAM_RESET. >>>> >>>> My thanks go to Liu Hui(Jason) for this information. >>>> >>>> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com> >>> Should this go into 2013.07? >>> >> >> If not too late. It only affect Nitrogen6x, at least until Sabrelite >> is combined with it. >> And Sabrelite is already using this value. > > Whose acks should I wait for on this? Acked-by: Stefano Babic <sba...@denx.de> >From the i.MX point of view, the patch is a fix for the RAM configuration and does not affects other boards but only the nitrogen. I had merged this in u-boot-imx, but it is too late for PR. If it is not too late, please merge it for release. Many thanks, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
