Add the call back to reset the LAN9730 after the FEAT_POWER has been called.
Signed-off-by: Dan Murphy <dmur...@ti.com> --- v3 - Added this patch to separate the patch series - http://patchwork.ozlabs.org/patch/258229/ v4 - Updated the CONFIG gpio to be PHY3 - http://patchwork.ozlabs.org/patch/259750/ board/ti/omap5_uevm/evm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 19d6e71..aa6846f 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -15,6 +15,7 @@ #ifdef CONFIG_USB_EHCI #include <usb.h> +#include <asm/gpio.h> #include <asm/arch/clock.h> #include <asm/arch/ehci.h> #include <asm/ehci-omap.h> @@ -169,4 +170,14 @@ int ehci_hcd_stop(void) ret = omap_ehci_hcd_stop(); return ret; } + +void usb_hub_reset_devices(int port) +{ + /* The LAN9730 needs to be reset after the port power has been set. */ + if (port == 3) { + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); + udelay(10); + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); + } +} #endif -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot