Dear Jean-Christophe PLAGNIOL-VILLARD, In message <20090405105630.ga11...@game.jcrosoft.org> you wrote: > Hi Wolfgang, > > Please pull > The following changes since commit 23e4af49e066a53cd3e3659b68ef90572d88de84: > Guennadi Liakhovetski (1): > ARM: add the imx31_phycore_eet target to MAINTAINERS > > are available in the git repository at: > > git://git.denx.de/u-boot-arm.git master > > Dirk Behme (1): > OMAP3: Update Overo pin mux for new expansion board > > Jean-Christophe PLAGNIOL-VILLARD (4): > arm: update co-processor 15 access > arm: clean cache management > arm: unify reset command > integratorap: fix PCI support > > Kyungmin Park (1): > Move machine specific code to board at s3c64xx (v2) > > Minkyu Kang (1): > s3c64xx: fix the wrong gpio offset > > Sanjeev Premi (1): > OMAP: Fix compile issue > > Tom Rix (2): > OMAP3 Fix multiline formatting in board init files. > ZOOM1 Remove legacy NAND defines > > board/armltd/integratorap/split_by_variant.sh | 18 +++- > board/omap3/beagle/beagle.c | 20 ++-- > board/omap3/evm/evm.c | 16 ++-- > board/omap3/overo/overo.c | 12 +- > board/omap3/overo/overo.h | 9 +- > board/omap3/pandora/pandora.c | 12 +- > board/omap3/zoom1/zoom1.c | 12 +- > board/samsung/smdk6400/lowlevel_init.S | 7 ++ > cpu/arm1136/cpu.c | 90 ++---------------- > cpu/arm1176/cpu.c | 103 +-------------------- > cpu/arm1176/s3c64xx/cpu_init.S | 7 -- > cpu/arm720t/cpu.c | 120 +++--------------------- > cpu/arm920t/cpu.c | 124 ++---------------------- > cpu/arm925t/cpu.c | 96 ++----------------- > cpu/arm926ejs/cpu.c | 125 ++---------------------- > cpu/arm946es/cpu.c | 101 ++------------------ > cpu/arm_cortexa8/cpu.c | 82 +---------------- > cpu/arm_cortexa8/omap3/board.c | 2 +- > cpu/arm_intcm/cpu.c | 25 ----- > cpu/ixp/cpu.c | 83 ++-------------- > cpu/lh7a40x/cpu.c | 121 ++---------------------- > cpu/pxa/cpu.c | 81 ++-------------- > cpu/s3c44b0/cpu.c | 9 -- > cpu/sa1100/cpu.c | 81 ++-------------- > include/asm-arm/system.h | 84 +++++++++++++++++ > include/configs/B2.h | 1 + > include/configs/assabet.h | 2 + > include/configs/cerf250.h | 3 + > include/configs/cradle.h | 3 + > include/configs/csb226.h | 4 + > include/configs/delta.h | 3 + > include/configs/dnp1110.h | 2 + > include/configs/evb4510.h | 1 + > include/configs/gcplus.h | 2 + > include/configs/innokom.h | 4 + > include/configs/integratorap.h | 4 +- > include/configs/lart.h | 2 + > include/configs/logodl.h | 4 + > include/configs/lubbock.h | 3 + > include/configs/omap3_zoom1.h | 17 ---- > include/configs/pleb2.h | 3 + > include/configs/pxa255_idp.h | 3 + > include/configs/shannon.h | 2 + > include/configs/trizepsiv.h | 3 + > include/configs/wepep250.h | 2 + > include/configs/xaeniax.h | 3 + > include/configs/xm250.h | 3 + > include/configs/xsengine.h | 3 + > include/configs/zylonite.h | 3 + > include/s3c6400.h | 11 ++- > lib_arm/Makefile | 4 + > lib_arm/cache-cp15.c | 120 ++++++++++++++++++++++++ > lib_arm/reset.c | 53 +++++++++++ > 53 files changed, 501 insertions(+), 1207 deletions(-) > create mode 100644 include/asm-arm/system.h > create mode 100644 lib_arm/cache-cp15.c > create mode 100644 lib_arm/reset.c
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If at first you don't succeed, you are running about average. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot