Hi! > U-Boot 2013.07-rc3 [ELDK 5.2.1 / ELDK 5.3] > > Now I've started to use the new ext4 code. I need the "ext4write" command. > Though there seems to be several problems with the ext2/ext4 code. > > I am testing on an ml507 (PPC440, Big Endian). > There are some cases where the a field is 16-bit but le32_to_cpu() is used. > Some checks (ie eh_magic) fails to match even if I use a correctly ext4 > formatted MMC/SD card. > > Does these seem right? Or am I mistaken?
This fixed ext4 on powerpc-based board. Thanks! Tested-by: Pavel Machek <pa...@denx.de> -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
