On Mon, Aug 05, 2013 at 04:00:34PM +0200, Heiko Schocher wrote: > add the am1808 based ipam390 board from Barix. > > - 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM > interface > - 128MByte, NAND Flash, 8bit databus to the NANDFlash > Interface > - Ethernet PHY Micrel KSZ8051R via RMII > - Console on UART 0 > - booting fron nand flash > - spl falcon bootmode > > Needed patches posted on the ML but not yet in mainline: > - [U-Boot,05/10] arm: spl: For Falcon Mode, set a default machid of ~0 > http://patchwork.ozlabs.org/patch/264336/ > > applies on git://git.denx.de/u-boot-ti.git master > last commit: > > commit 500a0daeecf36b72797c53ef78d9ad096a464d32 > Author: Dan Murphy <dmur...@ti.com> > Date: Thu Jul 11 13:10:27 2013 -0500 > gpio: tca642x: Add the tca642x gpio expander driver > > I am on vacation for two weeks, so I maybe not able to respond > immediately but as the merge window closes soon, I post this > board support now ... > > Heiko Schocher (4): > arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in > emac_pins_rmii pinmux > bootstage: get more BOOTSTAGE_ID* in show_boot_progress() > arm, da850: enable the correct uart in arch_cpu_init() > arm, da850: add ipam390 board support > > MAINTAINERS | 1 + > arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 4 + > arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 6 + > arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +- > board/Barix/ipam390/Makefile | 29 ++ > board/Barix/ipam390/README.ipam390 | 229 ++++++++++++++++ > board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ++++++++++++++ > board/Barix/ipam390/ipam390.c | 348 > ++++++++++++++++++++++++ > board/Barix/ipam390/u-boot-spl-ipam390.lds | 53 ++++ > boards.cfg | 1 + > include/bootstage.h | 1 + > include/configs/ipam390.h | 331 ++++++++++++++++++++++ > 12 Dateien ge??ndert, 1207 Zeilen hinzugef??gt(+), 1 Zeile entfernt(-) > create mode 100644 board/Barix/ipam390/Makefile > create mode 100644 board/Barix/ipam390/README.ipam390 > create mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg > create mode 100644 board/Barix/ipam390/ipam390.c > create mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds > create mode 100644 include/configs/ipam390.h
Applied to u-boot-ti/master, thanks. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot