On Mon, Aug 19, 2013 at 8:30 AM, Stefano Babic <sba...@denx.de> wrote: > Hio Otavio, > > On 12/08/2013 17:23, Otavio Salvador wrote: >> On Mon, Aug 12, 2013 at 11:39 AM, Stefano Babic <sba...@denx.de> wrote: >> ... >>> The patchset allows to add to the imx Header the CSF (command Sequence File) >>> generated by the tools provided by Freescale. The CSF is then simply >>> concatenated >>> to the u-boot image, making a signed bootloader, that the processor can >>> verify >>> if the fuses for the keys are burned. The processor (i.MX53 / i.MX6x) will >>> not >>> start a bootloader that cannot be verified - further infos how to configure >>> the SOC to verify the bootloader can be found in the User Manual of the >>> specific >>> SOC. >> ... >> >> Couldn't a brief 'how-to' to be added to the README > > I do not thnk so, because it will be a duplication of documentation > already provided by the manufacturer.
Yes; ok. >> and also the >> pointers to the documents where this is documented? > > Maybe I should point out in which document this stuff is covered. > Freescale can move the link (I find a link for each processor on the > Freescale's website). Something like "can be found in the "High > Assurance Boot Version Application Priogramming Interface Reference > Manual" as part of the Freescale Code Signing Tool, available on the > manufacturer's website ?" Yes; this would help people to find it. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
