Daniel Mack wrote: > Hi Oliver, > > getting back to this ancient thread now as I just got back to this > project. > ... > > Very cool - this helped me a lot and works well on a PXA303 board. > Thanks again. Did you try any further to bring this upstream? > > >
Good to hear it helped and no, I've not even looked at getting the ipaq stuff into either the mainline kernel or u-boot. I don't really have the time to even read the u-boot mailing list posts let alone commit to merging it. > And would you share the relevant parts of your config, especially those > which define the environment storage? > Iirc, I have it set with no environment but just set a big boot command to set it all up. The ipaq214 config is here: http://www.oliford.co.uk/hpipaq214/public/u-boot/ipaq214.h (ignore the other files in that dir) and my u-boot git tree is here if you want anything else: http://www.oliford.co.uk/hpipaq214/u-boot.git/ It also now has in there MMC/SD and basic keypad and LCD support for the PXA310. Let me know if there's anything else you want. Oliver _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot