On 08/20/2013 02:48 AM, Scott Wood wrote: > On Mon, 2013-08-19 at 17:50 +0200, Valentin Longchamp wrote: >> On 08/13/2013 11:38 PM, Scott Wood wrote: >>> On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote: >>>> This patch introduces the support for Keymile's kmp204x reference >>>> design. This design is based on Freescale's P2040/P2041 SoC. >>>> >>>> The peripherals used by this design are: >>>> - DDR3 RAM with SPD support >>>> - SPI NOR Flash as boot medium >>>> - NAND Flash >>>> - 2 PCIe busses (hosts 1 and 3) >>>> - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) >>>> - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt >>>> FPGA >>>> - 2 HW I2C busses >>>> - last but not least, the mandatory serial port >>>> >>>> The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb >>>> support and was changed according to our design (that means essentially >>>> removing what is not present on the designs and a few adaptations). >>> >>> A lot of the copied files have had Freescale copyrights removed... Also >>> please try to factor shared code out rather than duplicate, where >>> practical. >> >> Well, I had tried to come a first proposal that factored shared code but I >> was >> advised to copy the code: [1]. For the copyrights I will fix it. >> >> [1] >> > > Did you mean to cite something here? >
Oops, yes sorry: http://u-boot.10912.n7.nabble.com/RFC-PATCH-mpc85xx-move-generic-corenet-to-cpu-mpc85xxx-tt153910.html#none _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot