On Tue, Aug 06, 2013 at 03:18:47PM +0300, Taras Kondratiuk wrote: > This series adds OMAP4470 support. It initializes clocks, voltages and EMIF. > This is enough to boot SLP, but U-Boot will try to start battery charging > on TWL6032 and will crash, because registers GPADC registers are different. > > To get fully functional system Oleg's TWL6032 series [1] is needed > on top of this one. > > Tested on TI Blaze Tablet2 board. > > Based on v2013.07+ commit f53932a "dts/Makefile: pass -undef -D__DTS__ to cpp" > > [1] http://www.mail-archive.com/[email protected]/msg118364.html > > Lubomir Popov (1): > ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration > > Taras Kondratiuk (3): > ARM: OMAP4470: Add OMAP4470 identification > ARM: OMAP4470: Add voltage and dpll data > ARM: OMAP4460: sdp: Limit TPS mux config to 4460 > > arch/arm/cpu/armv7/omap4/hw_data.c | 36 +++++++++++++++++++++++++++ > arch/arm/cpu/armv7/omap4/hwinit.c | 3 +++ > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 41 > +++++++++++++++++++++++++------ > arch/arm/include/asm/arch-omap4/clock.h | 7 +++++- > arch/arm/include/asm/arch-omap4/omap.h | 1 + > arch/arm/include/asm/omap_common.h | 1 + > board/ti/sdp4430/sdp.c | 3 ++- > 7 files changed, 83 insertions(+), 9 deletions(-)
Applied to u-boot-ti/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
