Thanks Dave, I will try that. > -----Original Message----- > From: Liu Dave-R63238 > Sent: Thursday, August 29, 2013 1:21 PM > To: Jain Priyanka-B32167; u-boot@lists.denx.de > Subject: RE: observing u-boot build error due to oversizing > > Priyanka, > > If you use gcc version 4.7.2 (GCC), it will pass the build > > Regards, > Dave > > -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of Jain Priyanka-B32167 > Sent: Thursday, August 29, 2013 3:31 PM > To: u-boot@lists.denx.de > Subject: [U-Boot] observing u-boot build error due to oversizing > > Hi, > > When I do make P1021RDB-PC_36BIT_NAND in u-boot code base, I am getting > below errors. > Look like u-boot is getting oversized. Any idea how can this be resolved > > > /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux- > gnu/bin/powerpc-linux-gnu-gcc -E -g -Os -fpic -mrelocatable - > ffunction-sections -fdata-sections -meabi -D__KERNEL__ -ffunction- > sections -fdata-sections -DCONFIG_SYS_TEXT_BASE=0x00201000 - > DCONFIG_SPL_TEXT_BASE=0xfffff000 -DCONFIG_SPL_PAD_TO=4096 - > DCONFIG_SPL_BUILD -I/data_nmg/users/priyanka/u-boot/include -fno-builtin > -ffreestanding -nostdinc -isystem /opt/freescale/usr/local/gcc-4.5.55- > eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux-gnu/4.5.1/include > -pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 -msoft-float - > mno-string -mspe=yes -mno-spe -include /data_nmg/users/priyanka/u- > boot/include/u-boot/u-boot.lds.h -include /data_nmg/users/priyanka/u- > boot/include/config.h -DCPUDIR=arch/powerpc/cpu/mpc85xx - > I/data_nmg/users/priyanka/u-boot/spl/. -ansi -D__ASSEMBLY__ -P - < > /data_nmg/users/priyanka/u-boot/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds > > /data_nmg/users/priyanka/u-boot/spl/u-boot-spl.lds > cd /data_nmg/users/priyanka/u-boot/spl/ && /opt/freescale/usr/local/gcc- > 4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc-linux-gnu-ld -n -T > /data_nmg/users/priyanka/u-boot/spl/u-boot-spl.lds --gc-sections --gc- > sections -Bstatic -Ttext 0xfffff000 arch/powerpc/cpu/mpc85xx/start.o > arch/powerpc/cpu/mpc85xx/resetvec.o --start-group > arch/powerpc/cpu/mpc85xx/libmpc85xx.o arch/powerpc/cpu/mpc8xxx/lib8xxx.o > arch/powerpc/lib/libpowerpc.o board/freescale/common/libfreescale.o > board/freescale/p1_p2_rdb_pc/libp1_p2_rdb_pc.o drivers/mtd/nand/libnand.o > drivers/serial/libserial.o --end-group -L /opt/freescale/usr/local/gcc- > 4.5.55-eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux- > gnu/4.5.1/nof -lgcc -Map u-boot-spl.map -o u-boot-spl > /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux- > gnu/bin/powerpc-linux-gnu-ld: section .resetvec loaded at > [00000000fffffffc,00000000ffffffff] overlaps section .data loaded at > [00000000fffffe88,00000000ffffffff] > make[2]: *** [/data_nmg/users/priyanka/u-boot/spl/u-boot-spl] Error 1 > > Regards > Priyanka
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot