Eric,
On Wed, 28 Aug 2013 16:26:44 +0200 Eric Bénard <e...@eukrea.com> wrote: > Le Wed, 28 Aug 2013 19:23:33 +0800, > Tapani <tap...@technexion.com> a écrit : > > > > > Add support for TechNexion edm-cf-imx6 SoM > > > > The edm1-cf-imx6 SoM comes in three variants, one with imx6 solo cpu, > > one with an imx6 dual lite cpu and one with an imx6 quad cpu. > > > aren't these boards Wandboard without the MicroSD connector but with > either a eMMC or a NAND ? No. While u-boot level edm-cf-imx6 is compatible with Wandboard, there are differences (some different pin definitions, different wifi chips, different board ids, different maintainers, ... ). Also there is going to be a edm2-cf-imx6 module, which we are hoping to be able to share code with instead. However if someone wants to play with the SPL boot, a edm-cf-imx6 u-boot should work on a Wandboard (after changing machine id). //Tapani _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot