Hi Javier,
On 09/19/2013 04:04 PM, Javier Martinez Canillas wrote:
> On Mon, Sep 2, 2013 at 1:52 PM, Enric Balletbo Serra
> <eballe...@gmail.com> wrote:
>> 2013/9/2 Javier Martinez Canillas <jav...@dowhile0.org>:
>>> There seems to be a naming convention for the configuration
>>> files for boards using the same SoC family. This makes
>>> easier to do changes that affect different boards based
>>> on the same SoC.
>>>
>>> Since the IGEPv2 board and the IGEP COM Module use a TI
>>> OMAP35xx/DM37xx processor, is better to rename its board
>>> config to use this naming scheme.
>>>
>>> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
>>> ---
>>>
>>> Changes since v1:
>>> - Fix some issues in the commit changelog pointed out by Enric Balletbo.
>>>
>>> boards.cfg | 10 +-
>>> include/configs/igep00x0.h | 370
>>> ---------------------------------------
>>> include/configs/omap3_igep00x0.h | 370
>>> +++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 375 insertions(+), 375 deletions(-)
>>> delete mode 100644 include/configs/igep00x0.h
>>> create mode 100644 include/configs/omap3_igep00x0.h
>>>
>>> diff --git a/boards.cfg b/boards.cfg
>>> index d717226..8f1cb6e 100644
>>> --- a/boards.cfg
>>> +++ b/boards.cfg
>>> @@ -297,11 +297,11 @@ omap3_overo arm armv7
>>> overo -
>>> omap3_pandora arm armv7 pandora -
>>> omap3
>>> dig297 arm armv7 dig297
>>> comelit omap3
>>> cm_t35 arm armv7 cm_t35
>>> compulab omap3
>>> -igep0020 arm armv7 igep00x0
>>> isee omap3
>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>> -igep0020_nand arm armv7 igep00x0
>>> isee omap3
>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>> -igep0030 arm armv7 igep00x0
>>> isee omap3
>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>> -igep0030_nand arm armv7 igep00x0
>>> isee omap3
>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>> -igep0032 arm armv7 igep00x0
>>> isee omap3
>>> igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>> +omap3_igep0020 arm armv7 igep00x0
>>> isee omap3
>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
>>> +omap3_igep0020_nand arm armv7 igep00x0
>>> isee omap3
>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
>>> +omap3_igep0030 arm armv7 igep00x0
>>> isee omap3
>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
>>> +omap3_igep0030_nand arm armv7 igep00x0
>>> isee omap3
>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
>>> +omap3_igep0032 arm armv7 igep00x0
>>> isee omap3
>>> omap3_igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
>>> am335x_igep0033 arm armv7 igep0033
>>> isee am33xx
>>> am3517_evm arm armv7 am3517evm
>>> logicpd omap3
>>> mt_ventoux arm armv7 mt_ventoux
>>> teejet omap3
>
>> Acked-by: Enric Balletbo i Serra <eballe...@iseebcn.com>
>
> These patches don't apply on master anymore after commit 27af930e9
> ("Merge and reformat boards.cfg and MAINTAINERS"). I'll rebase the
> patches and repost.
If you are about to repost, can you please add '-M' flag to
git format-patch command (if you use this command).
This will detect renames and lower the patch size...
--
Regards,
Igor
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
