On Monday 13 April 2009, Jean-Christophe PLAGNIOL-VILLARD wrote: > please move this to the Makefile
===== CUT HERE From: David Brownell <dbrown...@users.sourceforge.net> Don't needlessly include lowlevel init code; that's only really needed with boot-from NOR (not boot-from-NAND). The 2nd stage loader (UBL) handles that before it loads U-Boot. Signed-off-by: David Brownell <dbrown...@users.sourceforge.net> --- cpu/arm926ejs/davinci/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/cpu/arm926ejs/davinci/Makefile +++ b/cpu/arm926ejs/davinci/Makefile @@ -28,7 +28,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a COBJS = timer.o ether.o lxt972.o dp83848.o -SOBJS = lowlevel_init.o reset.o +SOBJS = reset.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT + SOBJS += lowlevel_init.o +endif SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot