ping! On 09/16/13 21:49, Igor Grinberg wrote: > Two more adjustments before porting more Compulab boards to mainline U-Boot. > Move the eeprom code which can be used (and is suitable) by multiple Compulab > boards to a common location. > Move the display initialization code which can be used by multiple Compulab > OMAP based boards. > > Igor Grinberg (2): > cm-t35: move the eeprom code to common place > cm-t35: move the display code to common place > > board/compulab/cm_t35/Makefile | 3 -- > board/compulab/cm_t35/cm_t35.c | 7 ++- > board/compulab/common/Makefile | 36 +++++++++++++++ > board/compulab/{cm_t35 => common}/eeprom.c | 51 > ++++++++++++---------- > board/compulab/{cm_t35 => common}/eeprom.h | 8 ++-- > .../{cm_t35/display.c => common/omap3_display.c} | 0 > 6 files changed, 70 insertions(+), 35 deletions(-) > create mode 100644 board/compulab/common/Makefile > rename board/compulab/{cm_t35 => common}/eeprom.c (60%) > rename board/compulab/{cm_t35 => common}/eeprom.h (62%) > rename board/compulab/{cm_t35/display.c => common/omap3_display.c} (100%) >
-- Regards, Igor. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot