On Wed, 2013-10-02 at 14:40 +0000, Gupta, Pekon wrote: > Hi, > > Please see last set of queries inline.. > > > From: Scott Wood [mailto:scottw...@freescale.com] > > > On Sat, 2013-09-28 at 06:24 +0000, Gupta, Pekon wrote: > > > > From: Scott Wood [mailto:scottw...@freescale.com] > > > > > On Fri, 2013-09-27 at 04:18 +0000, Gupta, Pekon wrote: > [snip] > > > > > > > (1) drivers/mtd/nand/fsl_ifc_spl.c > > > (2) drivers/mtd/nand/fsl_elbc_spl.c > > > So CONFIG_SYS_NAND_DEVICE_WIDTH should help them also. right ? > > > > How would it help? > > > I meant, instead of requiring the modification in board file, > CONFIG_SPL_DEVICE_WIDTH can be put in include/configs/*.h
Those registers are already specified in include/configs/*.h for eLBC/IFC. > > > So can this new CONFIG_xx be accepted ? > > > > Only for SPL usage. > > > Ok. so should I rename to CONFIG_SPL_NAND_DEVICE_WIDTH ? In theory yes, though the other similar SPL NAND parameters use CONFIG_SYS. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot