On Wed, Oct 16, 2013 at 05:30:34PM -0700, York Sun wrote: > Tom, > > The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586: > > Prepare v2013.10 (2013-10-16 13:08:12 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx.git master > > for you to fetch changes up to 287df01e6aef0464c5e5bcbd7e87aa4ff1f24f5a: > > PCIe:change the method to get the address of a requested capability in > configuration space. (2013-10-16 16:15:17 -0700) > > ---------------------------------------------------------------- > Po Liu (3): > powerpc: add CONFIG_SECURE_BOOT condition into fsl_secure_boot.h > powerpc:c29xpcie: make ifc timing parameter flexible > powerpc/c29xpcie: modify DDR parameter to make DDR more stable > > Prabhakar Kushwaha (6): > powerpc/mpc85xx:Make L2 cache type independent of CHASSIS2 > powerpc/mpc85xx:Update processor defines for T1040 > powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator > board/bsc9131rdb: Update IFC timings for NAND flash > powerpc/t1040qds: Add T1040QDS board > boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLD > > Priyanka Jain (1): > powerpc: Fix CamelCase warnings in DDR related code > > Shaohui Xie (3): > powerpc/t4240: updated rcw_cfg to align with default hardware > configuration > powerpc/B4860: enable PBL tool for B4860 > powerpc/tool/pbl: fix pbl image compiling process > > Shengzhou Liu (4): > powerpc/p1010rdb: remove unused cpld_show > powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM > board/p1010rdb: add pin mux and sdhc support in any boot > powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa > > Ying Zhang (3): > powerpc: p1_p2_rdb_pc: Enable p1_p2_rdb_pc to boot from SD Card > with SPL > powerpc : p1_p2_rdb_pc : Enable p1_p2_rdb_pc to start from eSPI > with SPL > powerpc: p1_p2_rdb_pc: add TPL for p1_p2_rdb_pc nand boot > > York Sun (1): > powerpc/mpc85xx: Add workaround for erratum A006379 > > Zhao Qiang (3): > Corenet/p5040/SGMII:fix the problem for SGMII5/6 > SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode > PCIe:change the method to get the address of a requested > capability in configuration space. > > ramneek mehresh (1): > powerpc/usb: Mention usb1 before usb2 inside default hwconfig string > > Makefile | 1 + > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 + > arch/powerpc/cpu/mpc85xx/cpu_init.c | 13 +- > arch/powerpc/cpu/mpc85xx/fdt.c | 2 +- > arch/powerpc/cpu/mpc85xx/speed.c | 114 +-- > arch/powerpc/cpu/mpc85xx/start.S | 2 +- > .../powerpc/cpu/mpc8xxx/ddr/common_timing_params.h | 46 +- > arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 76 +- > arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 2 +- > arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c | 52 +- > arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c | 52 +- > arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 54 +- > arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 312 ++++---- > .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 214 +++--- > arch/powerpc/cpu/mpc8xxx/ddr/main.c | 6 +- > arch/powerpc/cpu/mpc8xxx/ddr/options.c | 34 +- > arch/powerpc/include/asm/config_mpc85xx.h | 35 +- > arch/powerpc/include/asm/fsl_ddr_dimm_params.h | 48 +- > arch/powerpc/include/asm/fsl_ddr_sdram.h | 28 +- > arch/powerpc/include/asm/fsl_errata.h | 25 + > arch/powerpc/include/asm/fsl_pci.h | 18 - > arch/powerpc/include/asm/fsl_secure_boot.h | 2 + > arch/powerpc/include/asm/immap_512x.h | 4 +- > arch/powerpc/include/asm/immap_85xx.h | 22 +- > board/exmeritus/hww1u1a/ddr.c | 2 +- > board/freescale/b4860qds/b4860qds_qixis.h | 5 + > board/freescale/b4860qds/b4_pbi.cfg | 27 + > board/freescale/b4860qds/b4_rcw.cfg | 7 + > board/freescale/b4860qds/ddr.c | 32 +- > board/freescale/b4860qds/eth_b4860qds.c | 18 + > board/freescale/bsc9131rdb/ddr.c | 26 +- > board/freescale/bsc9132qds/ddr.c | 26 +- > board/freescale/c29xpcie/ddr.c | 28 +- > board/freescale/c29xpcie/law.c | 4 +- > board/freescale/c29xpcie/tlb.c | 4 +- > board/freescale/common/qixis.h | 4 +- > board/freescale/common/sys_eeprom.c | 4 + > board/freescale/corenet_ds/ddr.c | 6 +- > board/freescale/corenet_ds/eth_hydra.c | 6 + > board/freescale/corenet_ds/eth_p4080.c | 12 + > board/freescale/corenet_ds/eth_superhydra.c | 72 +- > board/freescale/mpc8349emds/ddr.c | 8 +- > board/freescale/mpc8540ads/ddr.c | 2 +- > board/freescale/mpc8544ds/ddr.c | 2 +- > board/freescale/mpc8560ads/ddr.c | 2 +- > board/freescale/mpc8572ds/ddr.c | 6 +- > board/freescale/mpc8610hpcd/ddr.c | 2 +- > board/freescale/mpc8641hpcn/ddr.c | 2 +- > board/freescale/p1010rdb/ddr.c | 26 +- > board/freescale/p1010rdb/law.c | 2 - > board/freescale/p1010rdb/p1010rdb.c | 330 +++++++-- > board/freescale/p1010rdb/tlb.c | 4 - > board/freescale/p1022ds/ddr.c | 6 +- > board/freescale/p1023rdb/ddr.c | 26 +- > board/freescale/p1_p2_rdb_pc/Makefile | 3 + > board/freescale/p1_p2_rdb_pc/ddr.c | 130 ++-- > board/freescale/p1_p2_rdb_pc/spl.c | 122 ++++ > board/freescale/p1_p2_rdb_pc/spl_minimal.c | 83 +-- > board/freescale/p1_p2_rdb_pc/tlb.c | 27 +- > board/freescale/p2020ds/ddr.c | 6 +- > board/freescale/p2041rdb/ddr.c | 6 +- > board/freescale/t1040qds/Makefile | 37 + > board/freescale/t1040qds/README | 169 +++++ > board/freescale/t1040qds/ddr.c | 117 +++ > board/freescale/t1040qds/ddr.h | 50 ++ > board/freescale/t1040qds/law.c | 32 + > board/freescale/t1040qds/pci.c | 23 + > board/freescale/t1040qds/t1040qds.c | 255 +++++++ > board/freescale/t1040qds/t1040qds.h | 13 + > board/freescale/t1040qds/t1040qds_qixis.h | 36 + > board/freescale/t1040qds/tlb.c | 108 +++ > board/freescale/t4qds/ddr.c | 4 +- > board/freescale/t4qds/ddr.h | 2 +- > board/freescale/t4qds/t4_rcw.cfg | 8 +- > board/stx/stxgp3/ddr.c | 2 +- > board/stx/stxssa/ddr.c | 2 +- > board/xes/xpedite550x/ddr.c | 2 +- > boards.cfg | 43 +- > doc/README.pblimage | 15 +- > drivers/net/fm/Makefile | 1 + > drivers/net/fm/fm.h | 1 + > drivers/net/fm/init.c | 44 ++ > drivers/net/fm/t1040.c | 16 + > drivers/pci/fsl_pci_init.c | 44 +- > drivers/pci/pci.c | 65 ++ > include/configs/B4860QDS.h | 4 +- > include/configs/BSC9131RDB.h | 16 +- > include/configs/C29XPCIE.h | 8 +- > include/configs/P1010RDB.h | 118 ++- > include/configs/P2041RDB.h | 2 - > include/configs/T1040QDS.h | 761 > ++++++++++++++++++++ > include/configs/T4240QDS.h | 2 - > include/configs/corenet_ds.h | 6 +- > include/configs/p1_p2_rdb_pc.h | 176 +++-- > include/ddr_spd.h | 48 +- > include/fm_eth.h | 4 + > include/pci.h | 10 + > 97 files changed, 3437 insertions(+), 1052 deletions(-) > create mode 100644 arch/powerpc/include/asm/fsl_errata.h > create mode 100644 board/freescale/b4860qds/b4_pbi.cfg > create mode 100644 board/freescale/b4860qds/b4_rcw.cfg > create mode 100644 board/freescale/p1_p2_rdb_pc/spl.c > create mode 100644 board/freescale/t1040qds/Makefile > create mode 100644 board/freescale/t1040qds/README > create mode 100644 board/freescale/t1040qds/ddr.c > create mode 100644 board/freescale/t1040qds/ddr.h > create mode 100644 board/freescale/t1040qds/law.c > create mode 100644 board/freescale/t1040qds/pci.c > create mode 100644 board/freescale/t1040qds/t1040qds.c > create mode 100644 board/freescale/t1040qds/t1040qds.h > create mode 100644 board/freescale/t1040qds/t1040qds_qixis.h > create mode 100644 board/freescale/t1040qds/tlb.c > create mode 100644 drivers/net/fm/t1040.c > create mode 100644 include/configs/T1040QDS.h
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot