Acked-by: Jaehoon Chung <jh80.ch...@samsung.com>
On 11/06/2013 10:46 PM, Piotr Wilczek wrote:
> This patch adds support for USB and enables 'ums' command on Trats2 board.
>
> Signed-off-by: Piotr Wilczek <p.wilc...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> CC: Minkyu Kang <mk7.k...@samsung.com>
> ---
> This patch depends on the lated u-boot-usb/master.
>
> Changes for v2:
> - rebased on current USB tree
> - removed unnecessary pmic probing
>
> board/samsung/trats2/trats2.c | 92
> +++++++++++++++++++++++++++++++++++++++++
> include/configs/trats2.h | 18 ++++++++
> 2 files changed, 110 insertions(+)
>
> diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
> index d44d825..41a7310 100644
> --- a/board/samsung/trats2/trats2.c
> +++ b/board/samsung/trats2/trats2.c
> @@ -25,6 +25,9 @@
> #include <power/max77693_fg.h>
> #include <libtizen.h>
> #include <errno.h>
> +#include <usb.h>
> +#include <usb/s3c_udc.h>
> +#include <usb_mass_storage.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -308,6 +311,95 @@ int board_mmc_init(bd_t *bis)
> return err0 & err2;
> }
>
> +#ifdef CONFIG_USB_GADGET
> +static int s5pc210_phy_control(int on)
> +{
> + int ret = 0;
> + unsigned int val;
> + struct pmic *p, *p_pmic, *p_muic;
> +
> + p_pmic = pmic_get("MAX77686_PMIC");
> + if (!p_pmic)
> + return -ENODEV;
> +
> + if (pmic_probe(p_pmic))
> + return -1;
> +
> + p_muic = pmic_get("MAX77693_MUIC");
> + if (!p_muic)
> + return -ENODEV;
> +
> + if (pmic_probe(p_muic))
> + return -1;
> +
> + if (on) {
> + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
> + if (ret)
> + return -1;
> +
> + p = pmic_get("MAX77693_PMIC");
> + if (!p)
> + return -ENODEV;
> +
> + if (pmic_probe(p))
> + return -1;
> +
> + /* SAFEOUT */
> + ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
> + if (ret)
> + return -1;
> +
> + val |= MAX77693_ENSAFEOUT1;
> + ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
> + if (ret)
> + return -1;
> +
> + /* PATH: USB */
> + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
> + MAX77693_MUIC_CTRL1_DN1DP2);
> +
> + } else {
> + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
> + if (ret)
> + return -1;
> +
> + /* PATH: UART */
> + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
> + MAX77693_MUIC_CTRL1_UT1UR2);
> + }
> +
> + if (ret)
> + return -1;
> +
> +
> + return 0;
> +}
> +
> +struct s3c_plat_otg_data s5pc210_otg_data = {
> + .phy_control = s5pc210_phy_control,
> + .regs_phy = EXYNOS4X12_USBPHY_BASE,
> + .regs_otg = EXYNOS4X12_USBOTG_BASE,
> + .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
> + .usb_flags = PHY0_SLEEP,
> +};
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + debug("USB_udc_probe\n");
> + return s3c_udc_probe(&s5pc210_otg_data);
> +}
> +
> +#ifdef CONFIG_USB_CABLE_CHECK
> +int usb_cable_connected(void)
> +{
> + struct pmic *muic = pmic_get("MAX77693_MUIC");
> + int cable_connected = muic->chrg->chrg_type(muic);
> +
> + return !!cable_connected;
> +}
> +#endif
> +#endif
> +
> static int pmic_init_max77686(void)
> {
> struct pmic *p = pmic_get("MAX77686_PMIC");
> diff --git a/include/configs/trats2.h b/include/configs/trats2.h
> index 0e93836..66b1c95 100644
> --- a/include/configs/trats2.h
> +++ b/include/configs/trats2.h
> @@ -113,6 +113,16 @@
> #define CONFIG_CMD_EXT4
> #define CONFIG_CMD_EXT4_WRITE
>
> +/* USB Composite download gadget - g_dnl */
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_MMC
> +
> +/* USB Samsung's IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
> +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
> +
> /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
> #undef CONFIG_CMD_NET
>
> @@ -293,6 +303,11 @@
> #define CONFIG_POWER_MUIC_MAX77693
> #define CONFIG_POWER_FG_MAX77693
> #define CONFIG_POWER_BATTERY_TRATS2
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_USB_CABLE_CHECK
>
> /* LCD */
> #define CONFIG_EXYNOS_FB
> @@ -305,6 +320,9 @@
> #define CONFIG_VIDEO_BMP_GZIP
> #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
>
> +#define CONFIG_CMD_USB_MASS_STORAGE
> +#define CONFIG_USB_GADGET_MASS_STORAGE
> +
> /* Pass open firmware flat tree */
> #define CONFIG_OF_LIBFDT 1
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
