Hi Piotr, I think good that used the "trats2:xxx" instead of "trats: xxx" at subject.
On 11/12/2013 05:58 PM, Piotr Wilczek wrote: > Trats2 config is updated to support DFU mode. > Malloc pool must be increased for DFU buffer allocation. > > Signed-off-by: Piotr Wilczek <p.wilc...@samsung.com> > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > CC: Minkyu Kang <mk7.k...@samsung.com> > --- > This patch is based on > http://patchwork.ozlabs.org/patch/289378/ > > include/configs/trats2.h | 22 ++++++++++++++++++---- > 1 file changed, 18 insertions(+), 4 deletions(-) > > diff --git a/include/configs/trats2.h b/include/configs/trats2.h > index 66b1c95..52bb5e5 100644 > --- a/include/configs/trats2.h > +++ b/include/configs/trats2.h > @@ -65,10 +65,9 @@ > > #define CONFIG_DISPLAY_CPUINFO > > -/* > - * Size of malloc() pool > - */ > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) > +#include <asm/sizes.h> > +/* Size of malloc() pool */ > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) > > /* select serial console configuration */ > #define CONFIG_SERIAL2 > @@ -100,6 +99,7 @@ > #define CONFIG_CMD_CACHE > #define CONFIG_CMD_I2C > #define CONFIG_CMD_MMC > +#define CONFIG_CMD_DFU > #define CONFIG_CMD_GPT > #define CONFIG_CMD_PMIC > > @@ -115,12 +115,19 @@ > > /* USB Composite download gadget - g_dnl */ > #define CONFIG_USBDOWNLOAD_GADGET > +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M > #define CONFIG_DFU_FUNCTION > #define CONFIG_DFU_MMC > > +/* TIZEN THOR downloader support */ > +#define CONFIG_CMD_THOR_DOWNLOAD > +#define CONFIG_THOR_FUNCTION > + > /* USB Samsung's IDs */ > #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 > #define CONFIG_G_DNL_PRODUCT_NUM 0x6601 > +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM > +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D > #define CONFIG_G_DNL_MANUFACTURER "Samsung" > > /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */ > @@ -165,6 +172,12 @@ > "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ > "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ > > +#define CONFIG_DFU_ALT \ > + "u-boot mmc 80 400;" \ I recommend the "u-boot mmc 80 800" Best Regards, Jaehoon Chung > + "uImage ext4 0 2;" \ > + "exynos4412-trats2.dtb ext4 0 2;" \ > + ""PARTS_ROOT" part 0 5\0" > + > #define CONFIG_EXTRA_ENV_SETTINGS \ > "bootk=" \ > "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ > @@ -197,6 +210,7 @@ > "mmcrootpart=5\0" \ > "opts=always_resume=1\0" \ > "partitions=" PARTS_DEFAULT \ > + "dfu_alt_info=" CONFIG_DFU_ALT \ > "uartpath=ap\0" \ > "usbpath=ap\0" \ > "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot