On Oct 18, 2013, at 4:49 AM, Priyanka Jain wrote: > T1042RDB_PI is Freescale Reference Design Board supporting the T1042 > QorIQ Power Architecture™ processor. T1042 is a reduced personality > of T1040 SoC without Integrated 8-port Gigabit. The board is designed > with low power features targeted for Printing Image Market. > > T1042RDB_PI is similar to T1040RDB board with few differences like > it has video interface, supports T1042 personality > > T1042RDB_PI board Overview > ----------------------- > - Four e5500 cores, each with a private 256 KB L2 cache > - 256 KB shared L3 CoreNet platform cache (CPC) > - Interconnect CoreNet platform > - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving > support > - Data Path Acceleration Architecture (DPAA) incorporating acceleration > for the following functions: > - Packet parsing, classification, and distribution > - Queue management for scheduling, packet sequencing, and congestion > management > - Cryptography Acceleration > - RegEx Pattern Matching Acceleration > - IEEE Std 1588 support > - Hardware buffer management for buffer allocation and deallocation > - Ethernet interfaces > - Two on-board RGMII 10/100/1G ethernet ports. > - SERDES Connections, 8 lanes supporting: > — PCI > — SATA 2.0 > - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and > Interleaving > -IFC/Local Bus > - NAND flash: 1GB 8-bit NAND flash > - NOR: 128MB 16-bit NOR Flash > - Ethernet > - Two on-board RGMII 10/100/1G ethernet ports. > - PHY #0 remains powered up during deep-sleep > - CPLD > - Clocks > - System and DDR clock (SYSCLK, “DDRCLK”) > - SERDES clocks > - Video > - DIU supports video at up to 1280x1024x32bpp > - HDMI connector > - Power Supplies > - USB > - Supports two USB 2.0 ports with integrated PHYs > - Two type A ports with 5V@1.5A per port. > - SDHC > - SDHC/SDXC connector > - SPI > - On-board 64MB SPI flash > - I2C > - Device connected: EEPROM, thermal monitor, VID controller, RTC > - Other IO > - Two Serial ports > - ProfiBus port > - Four I2C ports > > Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com> > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > Signed-off-by: Priyanka Jain <priyanka.j...@freescale.com> > --- > Based on u-boot-mpc85xx/next branch. > Depends on patch at http://patchwork.ozlabs.org/patch/284452/ > > Changes for v2: > Updated CONFIG_PPC to CONFIG_PPC_T1042 in boards,cfg file > Updated ethernet specific configs
Applied to u-boot-mpc85xx/master. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
