From: David Feng <feng...@phytium.com.cn>

Signed-off-by: David Feng <feng...@phytium.com.cn>
Signed-off-by: Bhupesh Sharma <bhupesh.sha...@freescale.com>
---
 board/armltd/vexpress64/Makefile     |    8 ++
 board/armltd/vexpress64/vexpress64.c |   56 ++++++++++
 boards.cfg                           |    1 +
 include/configs/vexpress_aemv8a.h    |  189 ++++++++++++++++++++++++++++++++++
 4 files changed, 254 insertions(+)
 create mode 100644 board/armltd/vexpress64/Makefile
 create mode 100644 board/armltd/vexpress64/vexpress64.c
 create mode 100644 include/configs/vexpress_aemv8a.h

diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
new file mode 100644
index 0000000..e009141
--- /dev/null
+++ b/board/armltd/vexpress64/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y  := vexpress64.o
diff --git a/board/armltd/vexpress64/vexpress64.c 
b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..2ec3bc9
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <feng...@phytium.com.cn>
+ * Sharma Bhupesh <bhupesh.sha...@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+       return 0;
+}
+
+int dram_init(void)
+{
+       /*
+        * Clear spin table so that secondary processors
+        * observe the correct value after waken up from wfe.
+        */
+       *(unsigned long *)CPU_RELEASE_ADDR = 0;
+
+       gd->ram_size = PHYS_SDRAM_1_SIZE;
+       return 0;
+}
+
+int timer_init(void)
+{
+       return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Board specific ethernet initialization routine.
+ */
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0;
+#ifdef CONFIG_SMC91111
+       rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+       return rc;
+}
diff --git a/boards.cfg b/boards.cfg
index caba64e..5e0c99a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -386,6 +386,7 @@ Active  arm         pxa            -           -            
   vpac270
 Active  arm         pxa            -           icpdas          lp8x4x          
    lp8x4x                               -                                      
                                                                                
           Sergey Yanovich <ynv...@gmail.com>
 Active  arm         pxa            -           toradex         -               
    colibri_pxa270                       -                                      
                                                                                
           Marek Vasut <marek.va...@gmail.com>
 Active  arm         sa1100         -           -               -               
    jornada                              -                                      
                                                                                
           Kristoffer Ericson <kristoffer.eric...@gmail.com>
+Active  arm         armv8          -           armltd          vexpress64      
    vexpress_aemv8a                      vexpress_aemv8a:ARM64                  
                                                                                
           David Feng <feng...@phytium.com.cn>
 Active  avr32       at32ap         at32ap700x  atmel           -               
    atngw100                             -                                      
                                                                                
           Haavard Skinnemoen <haavard.skinnem...@atmel.com>
 Active  avr32       at32ap         at32ap700x  atmel           -               
    atngw100mkii                         -                                      
                                                                                
           Andreas Bießmann <andreas.de...@googlemail.com>
 Active  avr32       at32ap         at32ap700x  atmel           atstk1000       
    atstk1002                            -                                      
                                                                                
           Haavard Skinnemoen <haavard.skinnem...@atmel.com>
diff --git a/include/configs/vexpress_aemv8a.h 
b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..ce5f384
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,189 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ *   configurations.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+#define CONFIG_REMAKE_ELF
+
+/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
+
+/*#define CONFIG_SYS_GENERIC_BOARD*/
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING            " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING                "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE           0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE     vexpress64
+
+/* SMP Spin Table Definitions */
+#define CPU_RELEASE_ADDR               (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0                     0x00000000
+#define V2M_PA_CS1                     0x14000000
+#define V2M_PA_CS2                     0x18000000
+#define V2M_PA_CS3                     0x1c000000
+#define V2M_PA_CS4                     0x0c000000
+#define V2M_PA_CS5                     0x10000000
+
+#define V2M_PERIPH_OFFSET(x)           (x << 16)
+#define V2M_SYSREGS                    (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI             (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE                       0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0                       (V2M_PA_CS0)
+#define V2M_NOR1                       (V2M_PA_CS4)
+#define V2M_SRAM                       (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT                                (V2M_PA_CS3 + 
V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01                    (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23                    (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI             (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC                                (V2M_PA_CS3 + 
V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA                        (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL                        (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT                        (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY              (0x1800000)     /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE                      (0x2C001000)
+#define GICC_BASE                      (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START       V2M_BASE
+#define CONFIG_SYS_MEMTEST_END         (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC9111                 1
+#define CONFIG_SMC9111_BASE            (0x1a000000)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK             24000000
+#define CONFIG_PL01x_PORTS             {(void *)CONFIG_SYS_SERIAL0, \
+                                        (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX              0
+
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0             V2M_UART0
+#define CONFIG_SYS_SERIAL1             V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+/*#define CONFIG_MENU_SHOW*/
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH    0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR           (V2M_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   (V2M_BASE)      /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE              0x80000000      /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+                                       "kernel_addr=0x200000\0"        \
+                                       "initrd_addr=0xa00000\0"        \
+                                       "initrd_size=0x2000000\0"       \
+                                       "fdt_addr=0x100000\0"           \
+                                       "fdt_high=0xa0000000\0"
+
+#define CONFIG_BOOTARGS                        "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND             "bootm $kernel_addr " \
+                                       "$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTDELAY               -1
+
+/* Do not preserve environment */
+#define CONFIG_ENV_IS_NOWHERE          1
+#define CONFIG_ENV_SIZE                        0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT              "VExpress64# "
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING         1
+#define CONFIG_SYS_MAXARGS             64      /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
-- 
1.7.9.5


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to