add common phy reset code into a common function.
Signed-off-by: Heiko Schocher <h...@denx.de>
Cc: Andreas Bießmann <andreas.de...@googlemail.com>
Cc: Bo Shen <voice.s...@atmel.com>
Cc: Jens Scharsig <e...@bus-elektronik.de>
Cc: Sergey Lapin <sla...@ossfans.org>
Cc: Stelian Pop <stel...@popies.net>
Cc: Albin Tonnerre <albin.tonne...@free-electrons.com>
Cc: Eric Benard <e...@eukrea.com>
Cc: Markus Hubig <mhu...@imko.de>
---
- changes for v2:
- add comment from Andreas Bießmann:
- constify timeout
- add some more comment
- add Markus Hubig to Copyright
- removed makefile changes
- add CONFIG_AT91_WANTS_COMMON_PHY
- rebased against commit c2e5e802ecb7ab668ce9911b210ed68c804b349f
- Patch based on the spl v4 patchset from Bo Shen, see:
http://lists.denx.de/pipermail/u-boot/2013-November/167235.html
---
arch/arm/cpu/at91-common/Makefile | 1 +
arch/arm/cpu/at91-common/phy.c | 57 +++++++++++++++++++++++++
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
board/BuS/vl_ma2sc/vl_ma2sc.c | 18 +-------
board/afeb9260/afeb9260.c | 18 +-------
board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +--------
board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +--------
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +--------
board/bluewater/snapper9260/snapper9260.c | 16 +------
board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +--------
board/eukrea/cpu9260/cpu9260.c | 18 +-------
board/taskit/stamp9g20/stamp9g20.c | 31 +-------------
include/configs/afeb9260.h | 2 +-
include/configs/at91sam9260ek.h | 1 +
include/configs/at91sam9263ek.h | 1 +
include/configs/at91sam9m10g45ek.h | 1 +
include/configs/cpu9260.h | 1 +
include/configs/sbc35_a9g20.h | 1 +
include/configs/snapper9260.h | 1 +
include/configs/stamp9g20.h | 1 +
include/configs/vl_ma2sc.h | 1 +
21 files changed, 79 insertions(+), 167 deletions(-)
create mode 100644 arch/arm/cpu/at91-common/phy.c
diff --git a/arch/arm/cpu/at91-common/Makefile
b/arch/arm/cpu/at91-common/Makefile
index d97053f..5b97838 100644
--- a/arch/arm/cpu/at91-common/Makefile
+++ b/arch/arm/cpu/at91-common/Makefile
@@ -8,4 +8,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o
diff --git a/arch/arm/cpu/at91-common/phy.c b/arch/arm/cpu/at91-common/phy.c
new file mode 100644
index 0000000..3b6c60c
--- /dev/null
+++ b/arch/arm/cpu/at91-common/phy.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stel...@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2012
+ * Markus Hubig <mhu...@imko.de>
+ * IMKO GmbH <www.imko.de>
+ *
+ * Copyright (C) 2013 DENX Software Engineering, h...@denx.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <watchdog.h>
+
+void at91_phy_reset(void)
+{
+ unsigned long erstl;
+ unsigned long start = get_timer(0);
+ unsigned long const timeout = 1000; /* 1000ms */
+ at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+ erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
+
+ /*
+ * Need to reset PHY -> 500ms reset
+ * Reset PHY by pulling the NRST line for 500ms to low. To do so
+ * disable user reset for low level on NRST pin and poll the NRST
+ * level in reset status register.
+ */
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
+
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
+
+ /* Wait for end of hardware reset */
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
+ /* avoid shutdown by watchdog */
+ WATCHDOG_RESET();
+ mdelay(10);
+
+ /* timeout for not getting stuck in an endless loop */
+ if (get_timer(start) >= timeout) {
+ puts("*** ERROR: Timeout waiting for PHY reset!\n");
+ break;
+ }
+ };
+
+ /* Restore NRST value */
+ writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+}
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h
b/arch/arm/include/asm/arch-at91/at91_common.h
index 3ca4d5b..59e2f43 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -26,5 +26,6 @@ void at91_plla_init(u32 pllar);
void at91_mck_init(u32 mckr);
void at91_pmc_init(void);
void mem_init(void);
+void at91_phy_reset(void);
#endif /* AT91_COMMON_H */
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index e2ae6fd..412ff3b 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -16,7 +16,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91sam9263.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_common.h>
@@ -76,25 +75,12 @@ static void vl_ma2sc_nand_hw_init(void)
#ifdef CONFIG_MACB
static void vl_ma2sc_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index e1b1c10..ea9575d 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -13,7 +13,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
@@ -67,8 +66,6 @@ static void afeb9260_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
@@ -94,20 +91,7 @@ static void afeb9260_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
-
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c
b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 263de49..7f14af1 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <atmel_mci.h>
@@ -73,8 +72,6 @@ static void at91sam9260ek_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -98,21 +95,7 @@ static void at91sam9260ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c
b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 2e9246f..d42a173 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
@@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void)
#ifdef CONFIG_MACB
static void at91sam9263ek_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void)
*
* PHY has internal pull-down
*/
-
writel(1 << 25, &pio->pioc.pudr);
writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(1 << 25, &pio->pioc.puer);
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 6a071f6..b7e2efd 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
@@ -88,8 +87,6 @@ static void at91sam9m10g45ek_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -107,21 +104,7 @@ static void at91sam9m10g45ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA13),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA15) |
diff --git a/board/bluewater/snapper9260/snapper9260.c
b/board/bluewater/snapper9260/snapper9260.c
index 8a6919d..bfde129 100644
--- a/board/bluewater/snapper9260/snapper9260.c
+++ b/board/bluewater/snapper9260/snapper9260.c
@@ -14,7 +14,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <net.h>
#include <netdev.h>
@@ -31,8 +30,6 @@ static void macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -54,18 +51,7 @@ static void macb_hw_init(void)
/* Enable ethernet power */
pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0);
- /* Need to reset PHY -> 500ms reset */
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Bring the ethernet out of reset */
pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1);
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c
b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index ecf261c..2074a93 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -15,7 +15,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -77,8 +76,6 @@ static void sbc35_a9g20_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -102,21 +99,7 @@ static void sbc35_a9g20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 5e1524e..274f72d 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -17,7 +17,6 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
@@ -89,29 +88,14 @@ static void cpu9260_nand_hw_init(void)
#ifdef CONFIG_MACB
static void cpu9260_macb_hw_init(void)
{
- unsigned long rstcmr;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
- rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
diff --git a/board/taskit/stamp9g20/stamp9g20.c
b/board/taskit/stamp9g20/stamp9g20.c
index 704a63b..27cdf77 100644
--- a/board/taskit/stamp9g20/stamp9g20.c
+++ b/board/taskit/stamp9g20/stamp9g20.c
@@ -19,7 +19,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <watchdog.h>
@@ -67,8 +66,6 @@ static void stamp9G20_nand_hw_init(void)
static void stamp9G20_macb_hw_init(void)
{
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */
at91_set_gpio_output(AT91_PIN_PA26, 0);
@@ -91,33 +88,7 @@ static void stamp9G20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) &
- ~AT91_RSTC_MR_URSTEN), &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end of hardware reset */
- unsigned long start = get_timer(0);
- unsigned long timeout = 1000; /* 1000ms */
-
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
-
- /* avoid shutdown by watchdog */
- WATCHDOG_RESET();
- mdelay(10);
-
- /* timeout for not getting stuck in an endless loop */
- if (get_timer(start) >= timeout) {
- puts("*** ERROR: Timeout waiting for PHY reset!\n");
- break;
- };
- };
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 5e71898..14bac15 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -106,7 +106,7 @@
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RESET_PHY_R
-
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_NET_RETRY_COUNT 20
/* USB */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1c4bb81..73917b0 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -181,6 +181,7 @@
#define CONFIG_RMII 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 0a1969d..b9aa036 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -275,6 +275,7 @@
#define CONFIG_RMII 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R 1
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
diff --git a/include/configs/at91sam9m10g45ek.h
b/include/configs/at91sam9m10g45ek.h
index 2095fe6..aaaa8ec 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -120,6 +120,7 @@
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_EHCI
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index ccf36a5..22c0a09 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -310,6 +310,7 @@
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* LEDS */
/* Status LED */
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index cbcd4e1..7e16c45 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -115,6 +115,7 @@
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* USB */
#define CONFIG_USB_ATMEL
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 5436bae..5b957f0 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -59,6 +59,7 @@
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_TFTP_PORT
#define CONFIG_TFTP_TSIZE
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index 248e657..51339b1 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -145,6 +145,7 @@
#ifdef CONFIG_MACB
# define CONFIG_RMII /* use reduced MII inteface */
# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
+#define CONFIG_AT91_WANTS_COMMON_PHY
/* BOOTP and DHCP options */
# define CONFIG_BOOTP_BOOTFILESIZE
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 1489080..aacb84c 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -330,6 +330,7 @@
#define CONFIG_RMII
#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 5
+#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_OVERWRITE_ETHADDR_ONCE
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
