Dear Stefano Excuse me, I could not understand your mean absolutely clear. I have tested all the four patches on Coldfire platforms. Because only DSPI module is re-use on the two platforms , Coldfire is earlier, Only change config name of DSPI. Do you mean I should rename other modules config names in Coldfire? Could you give me some detail examples? Thank you very much!
Best regards, Fu Chao > Hi Chao, > > On 18/11/2013 07:34, Chao Fu wrote: > > From: Chao Fu <b44...@freescale.com> > > > > Freescale DSPI module is used on both the ColdFire platform and the > > ARM platform. There is patch-set to make the driver re-used by both > platforms. > > Some files and macro were changed accordingly, this patch follow those > > changes to update the macro and include file for some ColdFire boards. > > > > The updates include: > > Rename the CONFIG_CF_DSPI to CONFIG_FSL_DSPI. > > Add the get_dspi_clk function for ColdFire platform. > > > > I have not tested, but it seems you break Coldfire platform with previous > patches until this patch is not applied. This makes the tree not > bisectable. Is Coldfire buildable after applying only 1/4 ? > > IMHO you should change the coldifire platform together with moving and > renaming the driver to avoid breakages. > > Best regards, > Stefano Babic > > > -- > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de > ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot