On 15/11/2013 17:42, Giuseppe Pagano wrote: > Previous uDoo configuration adopts register settings for DDR3, clock, muxing, > etc. taken from Nitrogen6x. uDoo schematics is rather different from that > board, > and it needs customized setting for most of the registers. > All this changes can be considered atomical since it is part of initial > support > of the board. > > Patch changes uDoo configuration files path to a specific one, and adopt > optimized value for every configured register. > > Signed-off-by: Giuseppe Pagano <giuseppe.pag...@seco.com> > Tested-by: Fabio Estevam <fabio.este...@freescale.com> > CC: Stefano Babic <sba...@denx.de> > CC: Fabio Estevam <fabio.este...@freescale.com> > ---
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot