On Fri, Nov 29, 2013 at 4:28 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear Christian Gmeiner, > > In message > <cah9nwweb6s+3s4o25d7cifob9y3_7jmhosjo6o78fijquwz...@mail.gmail.com> you > wrote: >> >> I am running into the same problem. Me wonders which patch/change >> triggers this problem. I am using >> the same toolchain since I started to work with u-boot and it fails >> with the latest rc. > > Maybe Linaro started using a hard-float configuration only recently? >
For what it's worth, i just ran a git bisect on this issue today, as this compiler worked fine with v2013.10 toolchain: arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) 4.8.2 20131014 (prerelease) 762a88ccf8540948fbf8c31b40a29d1e0684a25b is the first bad commit commit 762a88ccf8540948fbf8c31b40a29d1e0684a25b Author: Pierre Aubert <p.aub...@staubli.com> Date: Thu Sep 19 17:48:59 2013 +0200 mx6: compute PLL PFD frequencies rather than using defines Signed-off-by: Pierre Aubert <p.aub...@staubli.com> CC: Stefano Babic <sba...@denx.de> :040000 040000 c3dba1387015304c14486872c9776d008d9a3b03 1f16de9cee07af71e12f1a746dcd962c9eb84bb0 M arch git bisect log git bisect start # good: [183acb700378a8cfc5d50a01a65de93fb2c24586] Prepare v2013.10 git bisect good 183acb700378a8cfc5d50a01a65de93fb2c24586 # bad: [d19ad726bcd5d9106f7ba9c750462fcc369f1020] Prepare v2014.01-rc1 git bisect bad d19ad726bcd5d9106f7ba9c750462fcc369f1020 # good: [65ba7add0d609bbd035b8d42fafdaf428ac24751] time: add weak annotation to timer_read_counter declaration git bisect good 65ba7add0d609bbd035b8d42fafdaf428ac24751 # bad: [c3ebb8c38a5da5e40da2786c5d850d1f6555ff95] Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx git bisect bad c3ebb8c38a5da5e40da2786c5d850d1f6555ff95 # bad: [3285d4ca197928a048d3dda86751b5d26e6e0e86] Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' git bisect bad 3285d4ca197928a048d3dda86751b5d26e6e0e86 # good: [552998e5f7655ba8fd3acff400012bd651edff06] TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address git bisect good 552998e5f7655ba8fd3acff400012bd651edff06 # bad: [195d130da1c2705f96571b7265312bdfa8a83fee] Revert "configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards" git bisect bad 195d130da1c2705f96571b7265312bdfa8a83fee # bad: [4867b634b7c0e5ede258b4998fa4b2710e7daacf] ARM: mx5: Enable L2 cache git bisect bad 4867b634b7c0e5ede258b4998fa4b2710e7daacf # bad: [0c5e26678b18e136c1514bf769a16060ae1b5ff8] udoo: Add initial support for mx6q udoo board git bisect bad 0c5e26678b18e136c1514bf769a16060ae1b5ff8 # bad: [6654f33c9b520bd4073c7f82a13044e79bc14898] ARM: mxs: tools: Use mkimage for BootStream generation git bisect bad 6654f33c9b520bd4073c7f82a13044e79bc14898 # bad: [762a88ccf8540948fbf8c31b40a29d1e0684a25b] mx6: compute PLL PFD frequencies rather than using defines git bisect bad 762a88ccf8540948fbf8c31b40a29d1e0684a25b # first bad commit: [762a88ccf8540948fbf8c31b40a29d1e0684a25b] mx6: compute PLL PFD frequencies rather than using defines using USE_PRIVATE_LIBGCC=yes causes another error.. arch/arm/cpu/armv7/mx6/built-in.o: In function `mxc_get_pll_pfd': /opt/github/u-boot/arch/arm/cpu/armv7/mx6/clock.c:126: undefined reference to `__aeabi_uldivmod' /opt/gcc/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-ld.bfd: BFD (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) 2.23.2.20130610 Linaro 2013.10-4 assertion fail /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-linaro-2.23.2-2013.10-4/bfd/elf32-arm.c:7687 /opt/gcc/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-ld.bfd: error: required section '.rel.plt' not found in the linker script /opt/gcc/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-ld.bfd: final link failed: Invalid operation make: *** [u-boot] Error 1 Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot