Signed-off-by: Dennis Gilmore <den...@ausil.us>
---
include/configs/omap4_common.h | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index ea56eeb..fcf934d 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -55,6 +55,9 @@
#include <configs/ti_armv7_common.h>
+/* enable generic distro config */
+#define DISTRO_DEFAULTS 1
+
/*
* Hardware drivers
*/
@@ -88,9 +91,13 @@
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
+ "pxefile_addr_r=0x82000000\0" \
+ "kernel_addr_r=0x84000000\0" \
+ "ramdisk_addr_r=0x90000000\0" \
+ "fdt_addr_r=0x83000000\0" \
"console=ttyO2,115200n8\0" \
"fdt_high=0xffffffff\0" \
- "fdtaddr=0x80f80000\0" \
+ "fdt_addr=0x80f80000\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
@@ -104,6 +111,22 @@
"vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
+ "bootcmd_setup=mmc rescan\0" \
+ "bootcmd_pxe=setenv bootfile \"\" ;dhcp; pxe get; pxe boot\0" \
+ "bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r}
boot.scr && source ${scr_addr_r}\0" \
+ "bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf;
sysboot ${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; sysboot
${boot_ifc} ${bootdevice} ext2\0" \
+ "bootcmd_disk_uenv=ext2load ${boot_ifc} ${bootdevice} ${uenv_addr_r}
uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \
+ "bootcmd_disk_kernel=ext2load ${boot_ifc} ${bootdevice}
${kernel_addr_r} vmlinuz && ext2load ${boot_ifc} ${bootdevice}
${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r}
${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \
+ "bootcmd_disk=run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; run
bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \
+ "bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \
+ "bootcmd_default=run bootcmd_mmc; run bootcmd_pxe\0" \
+ "localcmd=run bootcmd_mmc\0" \
+ "bootdevice=0\0" \
+ "bootargs=console=${console} root=LABEL=rootfs\0" \
+ "bootdelay=2\0" \
+ "bootretry=90\0" \
+ "netretry=once\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0" \
@@ -113,7 +136,7 @@
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"mmcboot=echo Booting from mmc${mmcdev} ...; " \
"run mmcargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdt_addr}\0" \
"findfdt="\
"if test $board_name = sdp4430; then " \
"setenv fdtfile omap4-sdp.dtb; fi; " \
@@ -125,12 +148,13 @@
"setenv fdtfile omap4-panda-es.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use;
fi; \0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdt_addr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
+ "run bootcmd_default; " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
--
1.8.4.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
