This patch fix following errors and warnings

spl_boot.c: In function 'exynos_spi_copy':
spl_boot.c:111:49: error: 'CONFIG_ENV_SPI_BASE' undeclared (first use in this 
function)
spl_boot.c:111:49: note: each undeclared identifier is reported only once for 
each function it appears in
spl_boot.c:142:2: error: 'SPI_FLASH_UBOOT_POS' undeclared (first use in this 
function)
spl_boot.c: In function 'copy_uboot_to_ram':
spl_boot.c:189:28: warning: unused variable 'param' [-Wunused-variable]
spl_boot.c: At top level:
spl_boot.c:107:13: warning: 'exynos_spi_copy' defined but not used 
[-Wunused-function]

Signed-off-by: Minkyu Kang <mk7.k...@samsung.com>
Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
---
 arch/arm/cpu/armv7/exynos/spl_boot.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c 
b/arch/arm/cpu/armv7/exynos/spl_boot.c
index 6faf13f..ade45fd 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -62,6 +62,7 @@ static int config_branch_prediction(int set_cr_z)
 }
 #endif
 
+#ifdef CONFIG_SPI_BOOTING
 static void spi_rx_tx(struct exynos_spi *regs, int todo,
                        void *dinp, void const *doutp, int i)
 {
@@ -174,6 +175,7 @@ static void exynos_spi_copy(unsigned int uboot_size, 
unsigned int uboot_addr)
        clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
        clrbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
 }
+#endif
 
 /*
 * Copy U-boot from mmc to RAM:
@@ -186,7 +188,9 @@ void copy_uboot_to_ram(void)
 
        u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
        u32 offset = 0, size = 0;
+#ifdef CONFIG_SPI_BOOTING
        struct spl_machine_param *param = spl_get_machine_params();
+#endif
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
        u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
        void (*end_bootop_from_emmc)(void);
-- 
1.7.9.5
-- 
Thanks,
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to