Hi Stephen, On Tue, Dec 03, 2013 at 09:01:55PM -0700, Stephen Warren wrote: > Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. > For SDHCI this isn't needed in practice, since the firmware already > turned on the power in order to load U-Boot. However, it's best to be > explicit. For USB, this is necessary, since the module isn't powered > otherwise. This will allow the kernel USB driver to work.
I didn't test this patch yet, but from skimming over it it looks similar to what I tried with barebox a while back. What I did notice with the "set power" mbox call is that it takes way longer than 100ms (the current mbox call timeout) to finish on a cold boot. You don't seem to bump the timeout here, and with 100ms I always hit it and hence the mbox call failed for me. Don't you get these huge delays? Regards, Andre _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot