Hi Andreas, On Mon, 9 Dec 2013 13:42:38 +0100, Andreas Bießmann <andreas.de...@googlemail.com> wrote:
> Dear Albert Aribaud, > > please pull the following changes from u-boot-atmel/master into > u-boot-arm/master. > > The following changes since commit 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7: > > arm: keep all sections in ELF file (2013-12-07 06:53:58 +0100) > > are available in the git repository at: > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to 1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4: > > arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) > (2013-12-09 13:21:54 +0100) > > ---------------------------------------------------------------- > Andreas Bießmann (4): > at91: add new gpio pin definitions > at91: redefine legacy GPIO PIN_BASE > at91: nand: switch atmel_nand to generic GPIO API > at91: switch coloured LED to gpio API > > Heiko Schocher (2): > arm, at91: add Siemens board taurus and axm > arm, at91: add siemens corvus board > > Mateusz Kulikowski (1): > arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) > > arch/arm/cpu/arm926ejs/at91/led.c | 16 ++- > arch/arm/include/asm/arch-at91/gpio.h | 26 ++++- > board/BuS/vl_ma2sc/vl_ma2sc.c | 5 +- > board/calao/usb_a9263/Makefile | 14 +++ > board/calao/usb_a9263/usb_a9263.c | 148 +++++++++++++++++++++++++ > board/egnite/ethernut5/ethernut5.c | 3 +- > board/esd/meesc/meesc.c | 5 +- > board/esd/otc570/otc570.c | 5 +- > board/eukrea/cpu9260/cpu9260.c | 5 +- > board/ronetix/pm9261/led.c | 14 +-- > board/ronetix/pm9261/pm9261.c | 5 +- > board/ronetix/pm9263/led.c | 10 +- > board/ronetix/pm9263/pm9263.c | 5 +- > board/ronetix/pm9g45/pm9g45.c | 5 +- > board/siemens/corvus/Makefile | 18 +++ > board/siemens/corvus/board.c | 195 > +++++++++++++++++++++++++++++++++ > board/siemens/taurus/Makefile | 18 +++ > board/siemens/taurus/taurus.c | 160 +++++++++++++++++++++++++++ > boards.cfg | 4 + > drivers/gpio/at91_gpio.c | 4 +- > drivers/mtd/nand/atmel_nand.c | 8 +- > include/configs/at91sam9n12ek.h | 4 +- > include/configs/corvus.h | 165 ++++++++++++++++++++++++++++ > include/configs/cpu9260.h | 4 +- > include/configs/ethernut5.h | 2 +- > include/configs/meesc.h | 4 +- > include/configs/otc570.h | 4 +- > include/configs/pm9261.h | 10 +- > include/configs/pm9263.h | 8 +- > include/configs/pm9g45.h | 8 +- > include/configs/taurus.h | 160 +++++++++++++++++++++++++++ > include/configs/usb_a9263.h | 169 ++++++++++++++++++++++++++++ > include/configs/vl_ma2sc.h | 4 +- > 33 files changed, 1145 insertions(+), 70 deletions(-) > create mode 100644 board/calao/usb_a9263/Makefile > create mode 100644 board/calao/usb_a9263/usb_a9263.c > create mode 100644 board/siemens/corvus/Makefile > create mode 100644 board/siemens/corvus/board.c > create mode 100644 board/siemens/taurus/Makefile > create mode 100644 board/siemens/taurus/taurus.c > create mode 100644 include/configs/corvus.h > create mode 100644 include/configs/taurus.h > create mode 100644 include/configs/usb_a9263.h Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot