Hi Minkyu Kang, Please do let me know if any coments on this patch set.
On Mon, Dec 9, 2013 at 2:20 PM, Rajeshwari S Shinde <rajeshwar...@samsung.com> wrote: > This patch adds basic board support for SMDK5420 board. > These patches are tested for booting fine on EVT1 SMDK5420. > > Changes in V2: > - Corrected a compilation issue for SMDK5420. > > Changes in V3: > - Add patch to support variable size SPL support > - Add patch to disable SMU for eMMC. > > Changes in V4: > - Added check for MAX77686 pmic compilation. > - Added correct calculation of gpio based addresses. > - Rebased on the latest u-boot code. > - Removed patches for UART and TZPC changes as > they were not needed. > - Added flag to disable SMU for eMMC. > > Changes in V5: > - Moved functions board_mmc_init and board_eth_init > to common/board.c in case of device tree support. > > Changes in V6: > - Rebased on the latest mainline branch. > - Moved the definitions for SMU to arch/arm dwmmc.h > > Changes in V7: > - Removed below patch as it is already merged > "DWMMC: SMDK5420: Disable SMU for eMMC" > - Corrected the multi line comments and removal of > blank spaces and lines. > - Corrected the license. > > Changes in V8: > - corrected the if loops with if conditions of > pro_id and cpu_id. > > Changes in V9: > - Added macros to get the base address > - Rebased on latest code. > > Changes in V10: > - Added new structures for Power and DMC registers for > 5420. > - Changed the input parameters for common dmc functions. > - Removed unnecesarry blank lines and added where ever required. > > Rajeshwari S Shinde (11): > EXYNOS5: Create a common board file > Exynos5420: Add base addresses for 5420 > EXYNOS5420: Add power register structure. > EXYNOS5420: Add dmc and phy_control register structure > Exynos5420: Add clock initialization for 5420 > Exynos5420: Add DDR3 initialization for 5420 > Exynos5420: Add support for 5420 in pinmux and gpio > Exynos5420: Add base patch for SMDK5420 > DTS: Add dts support for SMDK5420 > Config: Add initial config for SMDK5420 > SPL: EXYNOS: Prepare for variable size SPL support > > arch/arm/cpu/armv7/exynos/clock.c | 280 ++++++++- > arch/arm/cpu/armv7/exynos/clock_init.h | 17 + > arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++++++++++- > arch/arm/cpu/armv7/exynos/dmc_common.c | 60 +- > arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 ++++++++++++- > arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 ++++++++++++++++------ > arch/arm/cpu/armv7/exynos/pinmux.c | 260 +++++++- > arch/arm/dts/exynos5.dtsi | 198 ++++++ > arch/arm/dts/exynos5250.dtsi | 194 +----- > arch/arm/dts/exynos5420.dtsi | 70 +++ > arch/arm/include/asm/arch-exynos/board.h | 17 + > arch/arm/include/asm/arch-exynos/clk.h | 1 + > arch/arm/include/asm/arch-exynos/clock.h | 494 +++++++++++++++ > arch/arm/include/asm/arch-exynos/cpu.h | 52 +- > arch/arm/include/asm/arch-exynos/dmc.h | 177 ++++++ > arch/arm/include/asm/arch-exynos/gpio.h | 143 ++++- > arch/arm/include/asm/arch-exynos/periph.h | 3 + > arch/arm/include/asm/arch-exynos/power.h | 837 > +++++++++++++++++++++++++ > board/samsung/common/Makefile | 4 + > board/samsung/common/board.c | 410 ++++++++++++ > board/samsung/dts/exynos5420-smdk5420.dts | 169 +++++ > board/samsung/smdk5250/exynos5-dt.c | 352 +---------- > board/samsung/smdk5250/smdk5250.c | 182 +----- > board/samsung/smdk5420/Makefile | 11 + > board/samsung/smdk5420/smdk5420.c | 159 +++++ > board/samsung/smdk5420/smdk5420_spl.c | 52 ++ > boards.cfg | 1 + > include/configs/arndale.h | 1 + > include/configs/exynos5-dt.h | 289 +++++++++ > include/configs/exynos5250-dt.h | 283 +-------- > include/configs/smdk5420.h | 56 ++ > spl/Makefile | 7 +- > tools/Makefile | 3 +- > tools/mkexynosspl.c | 167 +++-- > 34 files changed, 5189 insertions(+), 1315 deletions(-) > create mode 100644 arch/arm/dts/exynos5.dtsi > create mode 100644 arch/arm/dts/exynos5420.dtsi > create mode 100644 arch/arm/include/asm/arch-exynos/board.h > create mode 100644 board/samsung/common/board.c > create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts > create mode 100644 board/samsung/smdk5420/Makefile > create mode 100644 board/samsung/smdk5420/smdk5420.c > create mode 100644 board/samsung/smdk5420/smdk5420_spl.c > create mode 100644 include/configs/exynos5-dt.h > create mode 100644 include/configs/smdk5420.h > > -- > 1.7.12.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot -- Regards, Rajeshwari Shinde _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot