This patch updates starting offset for free bytes in OOB which can be used by file-systems to store their metadata (like clean-marker in case of JFFS2).
Signed-off-by: Pekon Gupta <pe...@ti.com> --- drivers/mtd/nand/omap2.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f777250..bbdb5e8 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1835,8 +1835,6 @@ static int omap_nand_probe(struct platform_device *pdev) ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; else ecclayout->eccpos[0] = 1; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; break; case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: @@ -1854,8 +1852,6 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1890,8 +1886,6 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; /* This ECC scheme requires ELM H/W block */ if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) { pr_err("nand: error: could not initialize ELM\n"); @@ -1920,8 +1914,6 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; /* software bch library is used for locating errors */ nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, @@ -1963,8 +1955,6 @@ static int omap_nand_probe(struct platform_device *pdev) (mtd->writesize / nand_chip->ecc.size); ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; - ecclayout->oobfree->offset = ecclayout->eccpos[0] + - ecclayout->eccbytes; break; #else pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n"); @@ -1978,9 +1968,6 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - /* populate remaining ECC layout data */ - ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + - ecclayout->eccbytes); for (i = 1; i < ecclayout->eccbytes; i++) ecclayout->eccpos[i] = ecclayout->eccpos[0] + i; /* check if NAND device's OOB is enough to store ECC signatures */ @@ -1990,6 +1977,10 @@ static int omap_nand_probe(struct platform_device *pdev) err = -EINVAL; goto return_error; } + /* populate remaining ECC layout data */ + ecclayout->oobfree->offset = ecclayout->eccpos[ecclayout->eccbytes] + 1; + ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH + + ecclayout->eccbytes); /* second phase scan */ if (nand_scan_tail(mtd)) { -- 1.8.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot