Hi Ian, On Sun, 17 Nov 2013 15:17:43 +0000, Ian Campbell <i...@hellion.org.uk> wrote:
> The main purpose of this is to disable the use of the virtualisation > extensions > which Qemu does not emulate. > > Also enable a few additional commands and the u-boot API. > > This works for me with: > $ dd if=/dev/zero of=pflash0.img bs=1M count=64 > $ dd if=/dev/zero of=pflash1.img bs=1M count=64 > $ qemu-system-arm -M vexpress-a15 -cpu cortex-a15 -kernel u-boot -m 1024m -sd > mmc.img -nographic -pflash pflash0.img -pflash pflash1.img > > (for some reason both pflash images are needed for saveenv to work) Please split the above as follows: - a short problem and solution description in the commit message, above the commit message delimiter '---'; - anything else (examples, comments, etc) below the commit delimiter. > Signed-off-by: Ian Campbell <i...@hellion.org.uk> > Cc: albert.u.b...@aribaud.net > --- > boards.cfg | 1 + > include/configs/vexpress_ca15_tc2.h | 2 ++ > include/configs/vexpress_common.h | 4 ++++ > 3 files changed, 7 insertions(+) > > diff --git a/boards.cfg b/boards.cfg > index caba64e..6e2fccc 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -245,6 +245,7 @@ Active arm arm926ejs versatile armltd > versatile > Active arm arm946es - armltd integrator > integratorap_cm946es integratorap:CM946ES > > Linus Walleij <linus.wall...@linaro.org> > Active arm arm946es - armltd integrator > integratorcp_cm946es integratorcp:CM946ES > > Linus Walleij <linus.wall...@linaro.org> > Active arm armv7 - armltd vexpress > vexpress_ca15_tc2 - > > - > +Active arm armv7 - armltd vexpress > vexpress_ca15_tc2_qemu > vexpress_ca15_tc2:ARCH_VEXPRESS_QEMU > - > Active arm armv7 - armltd vexpress > vexpress_ca5x2 - > > Matt Waddel <matt.wad...@linaro.org> > Active arm armv7 - armltd vexpress > vexpress_ca9x4 - > > Matt Waddel <matt.wad...@linaro.org> > Active arm armv7 am33xx isee igep0033 > am335x_igep0033 - > > Enric Balletbo i Serra <eballe...@iseebcn.com> > diff --git a/include/configs/vexpress_ca15_tc2.h > b/include/configs/vexpress_ca15_tc2.h > index 982f4a7..ccdb3c5 100644 > --- a/include/configs/vexpress_ca15_tc2.h > +++ b/include/configs/vexpress_ca15_tc2.h > @@ -18,6 +18,8 @@ > #define CONFIG_SYSFLAGS_ADDR 0x1c010030 > #define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR > > +#ifndef CONFIG_ARCH_VEXPRESS_QEMU > #define CONFIG_ARMV7_VIRT > +#endif > > #endif > diff --git a/include/configs/vexpress_common.h > b/include/configs/vexpress_common.h > index 7e78f8a..fbb9993 100644 > --- a/include/configs/vexpress_common.h > +++ b/include/configs/vexpress_common.h > @@ -157,6 +157,7 @@ > #define CONFIG_CMD_DHCP > #define CONFIG_CMD_PXE > #define CONFIG_MENU > +#define CONFIG_CMD_ECHO Here and below, you are adding commands generally, i.e. not specifically for the new boards you're creating. I'd rather have this in a separate patch. > #define CONFIG_CMD_ELF > #define CONFIG_CMD_ENV > #define CONFIG_CMD_FLASH > @@ -164,6 +165,7 @@ > #define CONFIG_CMD_MEMORY > #define CONFIG_CMD_NET > #define CONFIG_CMD_PING > +#define CONFIG_CMD_EXT2 > #define CONFIG_CMD_SAVEENV > #define CONFIG_CMD_RUN > #define CONFIG_CMD_BOOTZ > @@ -176,6 +178,7 @@ > #define CONFIG_GENERIC_MMC > #define CONFIG_ARM_PL180_MMCI > #define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI > +#define CONFIG_SYS_MMC_MAX_DEVICE 2 > #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 > #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 > > @@ -253,6 +256,7 @@ > #define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 > #define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 > #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 > +#define CONFIG_API > > /* Timeout values in ticks */ > #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
