As the cs for spi is worked in gpio mode, so no need to configure it as peripheral and then configure to gpio. Configure it to gpio directly.
Signed-off-by: Bo Shen <voice.s...@atmel.com> --- Change in v2: - only move line to configure it to peripheral --- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 6f67c34..17a2a40 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -271,7 +271,6 @@ int board_init(void) #endif #ifdef CONFIG_ATMEL_SPI - at91_spi0_hw_init(1 << 0); at91_spi0_hw_init(1 << 4); #endif -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot